Clean all types of heat exchangers, condensers, industrial pipelines, boilers, and power plant equipment condensers. GlanChem Cooperation Ensures Reliability
Jining Green Chemical Technology Co., Ltd. (Abbreviated to Jining Green)Glan Cleaning Co.Established2010YearIs industrialVariousHeat Exchanger EquipmentCleaningNo Chinese content provided for translation.ProfessionalCompany. The company hasComplete SetPhilosophy of operation, industrial equipment cleaningTechnologyOur R&D capabilities, undertakeIndustry, private enterprises,Corporate chemical equipment, power station equipment, power plant condenser, boiler, boiler air preheater cleaning servicesAir conditioning cleaning, heat exchange equipment cleaning, handling cleaning services for machinery and equipment, chemical equipment, etc.; providing cleaning and descaling services for refrigeration and heating equipment.
JiningGreens Cleaning Company stocks250mpaDozens of cleaning machines in various models, over a dozen chemical cleaning pump stations. Mainly serving enterprises: power plants, chemical factories, oil refineries, food processing plants, public institutions, heating equipment, etc., the company also provides long-term services for...IndustryCustomers perform cleaning and design of industrial heat exchangers.
Our company has recently purchased domestic cleaning machines and imported cleaning equipment. We have also hired experienced professionals in the cleaning industry.Technical SpecialistStandardization and standardization have been achieved in the cleaning of heat exchange equipment.。
Chemical descaling process:
Recirculating cleaning utilizes two existing parallel descaling pipelines to form a loop, creating a recirculation system with the cleaning pump station. It involves adding a certain concentration of acidic solution, which circulates through the sludge water pipes for cleaning. As the acid cleaning reaches a certain level, the acidic solution is continuously replenished. For short-distance single sludge water pipelines, if conditions permit, a temporary pipeline can be laid to create a recirculation loop for cleaning. This process must be carried out while the system is shut down, and it is complex and costly.
No two grey pipes should form a loop during cleaning; only a single grey pipe should be used for open circuit cleaning. The method involves connecting one end of the grey pipe to the cleaning device, continuously preparing a certain concentration of cleaning solution in the fluid tank, and injecting it into the grey pipe continuously or intermittently. This process requires additional cleaning equipment during shutdown, resulting in higher costs.
The process involves continuously injecting a certain amount of acidic solution while the ash pipe is operating normally and not stopped, simultaneously adding a certain quantity of ash-pipe running cleaning inhibitor and pipeline cleaning stripping agent, and performing open-circuit cleaning. The primary role of the cleaning additive is to promote the reaction between the acidic solution and the ash scale at a specific concentration and flow rate, while also enhancing its solubility in water, reducing the formation of gas blockages, and ensuring the quality of ash-pipe cleaning.
High-pressure water jet cleaning offers high efficiency, low cost, non-damaging to workpieces, environmental-friendly, easy operation, and safety advantages.
High-pressure water technology boasts the following advantages.
Since the pressure of high-pressure water is less than the compressive strength grade of metal, high-pressure cleaning will not damage the base material being cleaned.
Additionally, parts cleaned with high-pressure water jetting do not require secondary cleaning.
(1) Categorized by chemical composition, they include carbonate scale, sulfate scale, silicate scale, and mixed scale. The primary components of carbonate scale are calcium carbonate and magnesium carbonate; for sulfate and silicate scales, the main components are calcium sulfate and silicate compounds, respectively.
Lime scale primarily forms due to the salts of calcium and magnesium present in the boiler feedwater, which precipitate and adhere to the metal surface upon heating. The thermal conductivity of lime scaleCorrosion intensifies, leading to scale corrosion in pipelines and accelerates the damage to heated surfaces. Once scale forms, it should be promptly removed using mechanical or chemical methods.
Heat exchanger and refrigeration equipment cleaning, choose GreenChem for reliability.
