1. This machine is suitable for TYPE-C, USB enameled wire, miniDP, HDMI, miniSAS, extremely thin coaxial cables, medical cables, FPC, FFC, and fine wires with many pins for welding, ensuring even焊points without bridging, meeting high-frequency transmission requirements. 2. Equipped with a Japanese temperature control system and a Wilead touch screen for stable performance and temperature control. 3. The operation interface features a user-friendly design for convenient and quick operation. 4. Real-time temperature monitoring with a LCD display of the temperature curve during the welding process. 5. Features automatic blowing and cooling of the welding tip. 6. Easy and quick mold and machine adjustment with automatic system detection and fault alarm functions. 7. Assistance with process introduction and technical support.
Advantages:
The pulse heat press machine can reach the desired temperature instantly upon power-on, and it can return to room temperature instantly once the voltage is removed from both ends of the welding head; moreover, the welding head is flat, ensuring that the appearance of the焊接 products is even and consistent, with minimal instances of poor soldering.
Usage:
The pulse heat press is used in the production processes of the following products: USB cable welding, soft ribbon FFC and flexible printed circuit (FPC) or rigid printed circuit board (PCB) welding, TCP and PCB or FPC welding, and FPC and PCB welding, etc.
The pulse heat press machine generates a high current at low voltage using a transformer, which is then rapidly heated through the welding head. The larger the pulse current output, the faster the welding head heats up. Place the workpiece in the fixture, lower the fixture under the welding head, press the start button, and the welding head presses down on the workpiece, initiating the heating process. The temperature rises rapidly with the input parameters and maintains accurate constant temperature. At this point, solder paste reflows, is cooled with blowing air, the welding head rises, the solder joints are even, there is no solder bridging, and the welding is complete.
