Advantages:
The pulse heat press machine can reach the desired temperature instantaneously upon power-on, and it can return to room temperature instantly once the voltage is removed from both ends of the welding head; plus, the welding head is flat, ensuring that the appearance of the焊接 products is even and consistent, with minimal instances of poor solder joints.
Usage:
Pulse heat press machines are used in the production processes of the following products: USB cable welding, soft ribbon FFC and flexible printed circuit (FPC) or rigid PCB welding, TCP and PCB or FPC welding, FPC and PCB welding, and more.
1. This machine is suitable for TYPE-C, USB enameled wire, miniDP, HDMI, miniSAS, extremely thin coaxial cables, medical wires, FPC, FFC, and ultra-thin wires with many pins for welding, ensuring even焊points without solder bridges, meeting high-frequency transmission requirements. 2. Equipped with a Japanese temperature control system and a Weilin touch screen, offering stable performance and temperature control. 3. The operating interface features a human-machine interface for easy and quick operation. 4. Real-time temperature monitoring with a liquid crystal display showing the temperature curve of the welding process. 5. Features automatic blowing and cooling of the welding tip. 6. Easy and quick mold and machine adjustment with system automatic detection and fault alarm functions. 7. Assistance with process introduction and technical support.
The pulse heat press machine generates a high current at low voltage using a transformer, which is rapidly heated through the welding head. The greater the pulse current output, the faster the welding head heats up. Place the workpiece in the fixture, lower the fixture under the welding head, press the start button, and the welding head presses down on the workpiece, initiating heating. The temperature rises rapidly with the input parameters and maintains accurate constant temperature. At this point, solder paste reflows, is blown with cool air, the welding head rises, the solder points are even, there is no bridging, and the welding is complete.
