Steel-lined plastic chemical equipment and storage tanks are indispensable and important basic equipment for industries such as oil, chemical, grain and oil, food, fire protection, transportation, metallurgy, and more. They are always an essential part of our economic life.

Can't do without a variety of corrosion-proof storage tanks, chemical storage tanks, which play an indispensable role in the development of the national economy. The products are widely used in chemical, biological, dye, metallurgy, and other industries.

Rare earths, machinery, electricity, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and wastewater treatment industries.
Caution for Steel-Lined Plastic Chemical Equipment Usage:
1. Corrosion-resistant storage tanks should be equipped with anti-static devices when containing high-resistance organic solvents.
2. Anti-corrosion storage tanks should prevent intense impacts and collisions on the equipment's body during the manufacturing process.
3. Full plastic flanges, being softer than steel plates, require that users inspect the sealing function of the storage tank equipment before use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids.

First, test for leaks with water to prevent any loss.
4. The anti-corrosion storage tanks (vessels) are at room temperature and atmospheric pressure. The steel-plastic composite storage tanks are used at temperatures of -40℃ to 98℃, while the polyethylene full plastic storage tanks are used at temperatures of -40℃ to 60℃.
5. Tanks (Storage Tanks) should be clearly marked with the stored substances when storing chemicals. Nearby the tank placement should be a drainage trench and dilution equipment.
6. It is necessary to open the venting port for the equipment's filling and discharge to prevent damage due to pressure.
7. Equipment should be operated in an environment far from the source of vibration and prevent contact with open flames.
8. If there are pipes with joints or flanges at the bottom of the storage tank, they must be perpendicular to the barrel wall. Soft connections should be used to prevent uneven expansion of the barrel wall from top to bottom after the liquid is filled, which may cause damage to the joints.

Resulting in leakage, severe cases may damage the joints and drum.
9. When the inlet is positioned higher from the tank bottom, the inlet should bend towards the tank wall to allow the incoming liquid to flow down along the wall, reducing impact on the bottom.
10. Pipelines and accessories connected to the equipment should prevent their weight from directly acting on the equipment. During hoisting, the receiving points, manholes, etc., on the equipment must not be used as anchoring points.
11. The receiving part on the equipment should use acid-resistant gaskets and be sealed properly; gaskets should be replaced in a timely manner.
12. Equipment operation, usage, and protection must comply with national regulations.