Steel-lined plastic chemical equipment and storage tanks are indispensable and essential basic equipment in industries such as petrochemicals, grain and oil, food, fire protection, transportation, metallurgy, and more. They are always a vital part of our economic life.

Cannot do without various sizes of anti-corrosion storage tanks, chemical storage tanks, which play an indispensable role in the development of the national economy. The products are widely applicable in the chemical, biological, dye, metallurgical, and other industries.

Rare earths, machinery, power, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and drainage industries.
Cautionary Notes for Steel-Lined Plastic Chemical Equipment:
1. When storing high-resistance organic solvents in anti-corrosion tanks (storage tanks), static dissipative equipment should be installed.
2. Corrosion-resistant storage tanks should prevent severe impacts and collisions during the equipment process.
3. Full plastic flanges, being softer than steel plates, require users to inspect the sealing function of the storage tank equipment before use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids

First, test for leaks with water to prevent any loss.
4. Corrosion-proof storage tanks are at normal temperature and pressure. The composite steel-plastic storage tanks are used at temperatures ranging from -40℃ to 98℃, while the fully plastic polyethylene storage tanks are used at temperatures from -40℃ to 60℃.
5. Tanks (Storage Tanks) should be clearly labeled with the stored materials when containing chemicals. There should be a drainage trench and dilution equipment nearby the location where the tanks are placed.
6. It is necessary to isolate the filling and output of the equipment, to prevent damage from pressure.
7. Equipment should be operated in an environment far from the source of vibration and prevent contact with open flames.
8. Any pipes with joints or flanges at the bottom of the storage tank must be vertical to the barrel wall. Soft joints should be used to prevent uneven expansion of the barrel wall from top to bottom after the liquid is filled, which may cause damage to the joints.

Resulting in leakage, and in severe cases, damage to the joints and drum body.
9. When the liquid inlet is high above the tank bottom, the inlet should bend towards the tank wall to allow the liquid to flow down along the wall, reducing the impact on the bottom.
10. Piping and accessories connecting to the equipment should be prevented from exerting their weight directly on the equipment. During lifting, no parts such as receiving ports or manholes on the equipment should be used as points of leverage.
11. Select acid-resistant gaskets for sealing on the equipment and replace them promptly.
12. Equipment operation, usage, and protection must comply with national regulations.