Steel-lined plastic chemical equipment and storage tanks are indispensable and essential basic equipment in industries such as petrochemicals, grain and oil, food, fire protection, transportation, metallurgy, and more. They are always a vital part of our economic life.

indispensable for various sizes of corrosion-resistant storage tanks, chemical storage tanks, playing an indispensable role in the development of the national economy. The products are widely used in the chemical, biological, dye, metallurgical, and other industries.

Rare earths, machinery, electricity, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and drainage industries.
Precautions for using steel-lined plastic chemical equipment:
1. When storing high-resistance organic solvents in corrosion-resistant tanks (storage tanks), anti-static equipment should be installed.
2. Anti-corrosion storage tanks should prevent intense impacts and knocks on the equipment's body during the production process.
3. Full plastic flanges, being softer than steel plates, require users to inspect the sealing function of the storage tank equipment before use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids.

First, test for leaks with water to prevent any loss.
4. Corrosion-proof storage tanks are at normal temperature and pressure. The composite steel-plastic storage tanks are used at temperatures of -40℃ to 98℃, while the all-plastic polyethylene storage tanks are used at temperatures of -40℃ to 60℃.
5. Tanks (Storage Tanks) should be clearly marked with the stored substances when storing chemicals. There should be a drainage trench and dilution equipment nearby the location where the tanks are placed.
6. It's necessary to isolate the filling and discharge of the equipment to prevent damage due to pressure.
7. Equipment should be used in an environment far from the source of vibration and prevent contact with open flames.
8. If there are pipes with joints or flanges at the bottom of the storage tank, they must be vertical to the barrel wall. Soft connections should be used to prevent uneven expansion of the barrel wall from top to bottom after the liquid is filled, which may cause damage to the joints.

Result in leakage, severe cases may damage joints and drums.
9. When the inlet is high above the tank bottom, bend the inlet towards the tank wall to allow the liquid to flow down along the wall, reducing impact on the bottom.
10. Piping and accessories connecting to the equipment should prevent their weight from directly acting on the equipment. During lifting, the receiving points and manholes on the equipment must not be used as force points.
11. The receiver on the equipment should be fitted with anti-acid gaskets and sealed, and gaskets should be replaced promptly.
12. Equipment installation, operation, and protection must comply with national regulations.