Steel-lined plastic chemical equipment and storage tanks are indispensable and important basic equipment in industries such as petrochemicals, grain and oil, food, fire protection, transportation, metallurgy, and more. They are always a vital part of our economic life.

Cannot do without various sizes of anti-corrosion storage tanks, chemical storage tanks, which play an indispensable role in the national economic development. The products are widely applicable to chemical, biological, dye, metallurgy,

Rare earths, machinery, electricity, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and wastewater treatment industries.
Precautions for using steel-plastic lined chemical equipment:
1. When storing high-resistance organic solvents in corrosion-proof tanks (storage tanks), anti-static equipment should be installed.
2. Anti-corrosion storage tanks should prevent intense impacts and knocks on the equipment's body during the production process.
3. Full plastic flanges, being softer than steel plates, require users to inspect the sealing function of the storage tank equipment before use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids.

First, test for leaks with water to prevent any loss.
4. The corrosion-resistant storage tanks are atmospheric pressure tanks. The steel-plastic composite storage tanks are used at temperatures ranging from -40℃ to 98℃, while the polyethylene all-plastic storage tanks are used at temperatures from -40℃ to 60℃.
5. Tanks (Storage Tanks) should be clearly marked with the stored substances when containing chemicals. There should be a drainage trench and dilution equipment nearby the location where the tanks are placed.
6. It is necessary to open the venting port for the equipment's filling and discharge to prevent pressure damage.
7. Equipment should be operated in an environment far from the source of vibration and should be kept away from open flames.
8. If there are pipes with joints or flanges at the bottom of the tank, they must be perpendicular to the barrel wall. Soft connections should be used to prevent uneven expansion of the barrel wall from top to bottom after the liquid is filled, which may cause damage to the joints.

Resulting in leakage, severe cases may damage the joints and drum.
9. When the inlet is higher from the bottom of the tank, the inlet should bend towards the tank wall to allow the incoming liquid to flow down along the wall, reducing the impact on the bottom.
10. Piping and accessories connected to the equipment should prevent their weight from directly acting on the equipment. During lifting, the receiving points, manholes, etc., on the equipment must not be used as anchoring points.
11. Select acid-resistant gaskets for sealing on the equipment and replace them promptly.
12. The equipment's operation and protection must comply with national regulations as required.