Steel-lined plastic chemical equipment and storage tanks are indispensable and important basic equipment for industries such as petrochemicals, grain and oil, food, fire protection, transportation, metallurgy, etc., always playing a crucial role in our economic life.

Can't do without various sizes of anti-corrosion storage tanks and chemical storage tanks, which play an indispensable role in the national economic development. The products are widely applicable in the chemical, biological, dye, metallurgical, and other industries.

Rare earths, machinery, electricity, electronics, environmental protection, textiles, brewing, food, aviation, water supply, and drainage industries.
Caution for the use of steel-lined plastic chemical equipment:
1. When storing high-resistance organic solvents in anti-corrosion tanks (storage tanks), anti-static equipment should be installed.
2. Anti-corrosion storage tanks should prevent intense impacts and collisions on the equipment body during the production process.
3. Full plastic flanges, being softer than steel plates, require users to inspect the sealing function of the storage tank equipment prior to use. A liquid test can be conducted to check for leaks. Storage tanks (vessels) for containing chemical liquids.

First, test for leaks with water to prevent any loss.
4. The corrosion-resistant storage tanks (tanks) are at normal temperature and pressure. The steel-plastic composite storage tanks are used at temperatures of -40℃ to 98℃, while the all-plastic polyethylene storage tanks are used at temperatures of -40℃ to 60℃.
5. Tanks (storage tanks) must be clearly labeled with the stored materials when storing chemicals. Nearby the tank location, there should be a drainage trench and dilution equipment.
6. It is necessary to open the drain and vent ports of the equipment to prevent damage due to pressure.
7. The equipment should be used in an environment far from the source of vibration and prevent contact with open flames.
8. Any pipes with joints or flanges at the bottom of the storage tank must be perpendicular to the tank wall. Soft connections must be used to prevent uneven expansion of the tank wall from top to bottom upon filling with liquid, which could damage the joints.

Leakage can lead to severe damage to joints and drums.
9. When the liquid inlet is high above the tank bottom, the inlet should bend towards the tank wall to allow the liquid to flow down along the wall, reducing the impact on the bottom.
10. Pipe connections and accessories that interface with equipment should prevent their weight from directly acting on the equipment. During lifting, receiving points and manholes on the equipment must not be used as anchor points.
11. Choose acid-resistant gaskets for sealing on equipment and replace them promptly.
12. The equipment's installation, operation, and protection must comply with national regulations.