Note: Prices are subject to actual.

I-Beam Trolley: Available in medium, heavy, and light load types, with corresponding roller sizes of 86, 73, and 55. Load capacity is less than or equal to 50-150KG, categorized by tray layers into single, double, and triple layers. Each category features an I-Beam trolley that supplies power to crane trolleys via a conductive method. It consists of walking wheels, brackets, and trays, with the flexible cable fixed on the trays. The cable is synchronized with the I-Beam cable trolley via the牵引架 (traction frame), thereby achieving the purpose of cable power supply.

Detailed Description:

The I-beam trolley series includes models I, II, III, IV, and V. If the customer opts for 12#, 14#, 16#, or a larger gauge I-beam, please specify at the time of ordering, and our factory can supply the complete set. The GHC-III I-beam trolley is used for the movement of suspended and mobile power machinery and has been widely applied in various industries. This device boasts a sturdy structure, flexible movement, and is safe and reliable.

The GHC-Ⅲ I-beam pulley stands out for its high rigidity and load-bearing capacity, ease of installation, and smooth operation. It also comes with an electric pulley, ensuring it maintains the same speed as the traction equipment, thereby reducing cable damage during operation. Particularly suitable for wider or heavier cables, it showcases its superiority even more.

It operates normally in indoor, outdoor, dusty, greasy, and environments with large temperature differences. The TB-GZG type pulley consists of three parts: the winch pulley, cable pulley, and end pulley. The winch pulley follows the moving machinery's cable guide (traction) device, with one per moving machinery, operating back and forth with the machinery.

The GHC-Ⅲ type I-Beam Pulley Device is used for suspending and moving the cables of power supply machinery during movement. It has been widely applied in various lifting machinery. The device boasts features such as sturdy structure, flexibility, and safety and reliability.

Intermediate cable pulleys hang the cables within the I-beam track range as the traction pulley moves. Both ends are equipped with shock absorbers, and the number of pulleys varies depending on the movement length. Terminal pulleys are fixed at the end of the I-beam guide rail, usually one per moving mechanism. This series of pulleys includes 6#, 8#, 10#, 12#, 14#, 16# models. If the user opts for a larger I-beam size, please specify, and our factory can supply the complete set.

The GHC-Ⅲ type I-Beam pulley consists of three parts: the牵引 pulley, the cable pulley, and the terminal pulley. The牵引 pulley follows the guide cable (traction) device of the moving machinery, with one for each moving machinery, operating back and forth with the machinery. The middle cable pulley suspends the cable within the I-Beam track range, moving with the牵引 pulley, and both ends are equipped with cushioning bumpers. The number of pulleys varies depending on the length of movement. The terminal pulley is fixed at the end of the I-Beam guide rail, usually one per moving machinery.

Product Introduction:

The HC series cable pulley series lightweight load cable transmission pulley device is used for the suspension and movement of cables for mobile power machinery during movement. It has been widely used in various lifting machinery. The device features a sturdy structure, flexible movement, and safety and reliability.

The light-load cable pulley consists of three parts: the traction pulley, cable pulley, and terminal pulley. The traction pulley follows the cable guide (traction) device of the moving machinery, with one for each moving machinery, operating back and forth with the machinery. The intermediate cable pulley suspends the cable within the I-beam track range, moving with the traction pulley, and both ends are equipped with cushioning bumpers. The number of pulleys varies depending on the length of movement. The terminal pulley is fixed at the end of the I-beam guide rail, typically one per moving machinery.

This series of pulleys includes five models: I, II, III, IV, and V. If the customer uses 12#, 14#, 16#, or a larger size of I-beam steel, please specify it when placing the order. Our factory can supply the complete set.

Product Introduction:

The HC series cable pulley is a conductive form of power supply for crane trolleys, consisting of running wheels, brackets, and a tray. The flexible cable is fixed to the tray and synchronized with the cable pulley by the traction frame, thereby achieving the purpose of powering the trolley.

The HC series cable pulleys are available in medium, heavy, and light load types, with three sizes of pulley wheels: Φ80, Φ63, and Φ50. The load capacity ranges from ≤50 to 150kg. Each type is divided into single, double, and triple deck levels, with three configurations in each type: the leading end is a cable tugger, the terminal is a fixed hanging bracket, and the middle section is the cable pulley.

Light Load Cable Conveying Pulley Instructions

1. After the fixed hanger bracket is installed, a back panel should be hung at the back.

2. Adjust the tow head to ensure the cart does not touch the upper and lower edges of the tow hole throughout its travel.

3. The cable length is 1.2 times the crane span plus 8 meters.

4. Adjust the traction steel wire rope to be shorter than the length of the same cable section, with the traction steel wire rope bearing the load during operation.

5. When the cable diameters are unequal, soft rubber should be placed between the cable clamps to make the outer diameters approximately the same, facilitating the tight clamping of the cable.

6. When laying cable on fabric, ensure both sides of the cable tray are evenly supported.

7. When the cable pulley is two or three layers, the requirements are the same.

8. The double washers on the pulley assembly are adjustment washers. When the guide rail is not suitable, place the washers on the inside of the fixed plate to adjust the width of the rail spacing. The products are manufactured with guides as I 100*68*4.5, I 120*74*5, I 140*80*5, and I 160*88*6 at the factory. Non-standard pulleys are processed and manufactured according to the drawings.