Product Introduction:
The hollow blade dryer utilizes vacuum drying, starting from the filter or centrifugal filter cake, to obtain dry powder; in a closed system, hot water, steam, or hot fluid is used as a jacket, and the heating medium in the hollow blade and hollow shaft.
Standard design of the hollow paddle dryer includes a dust collector, condenser, receiver, and vacuum pump. The hollow paddle dryer features a cylindrical jacketed vessel with a central shaft and innovative paddle blades.s2-RVPDThe agitator blades are designed to sweep the entire inner surface, while rotating the material, ensuring all product media come into contact with the heated inner surface.
During operation, if the hollow paddle dryer's drying system is not installed to promote even distribution of air circulation length and width, inconsistencies in product quality, moisture, and temperature may occur. To ensure a reasonable setpoint for temperature, if the existing heat source is not functioning properly or does not provide sufficient heat to meet current production demands, it may be necessary to reduce the dryer's production capacity.
Product Specifications:
Model | KJG-3 | KJG-8 | KJG-12.5 | KJG-25 | KJG-50 | |
Heat Transfer Area | m2 | 3 | 8 | 12.5 | 25 | 50 |
RPM | r/min | 6-24 | 5-20 | 5-20 | 5-20 | 4-16 |
Power | kw | 1.5 | 4 | 5.5 | 11 | 55 |
Effective Volume | m3 | 0.065 | 0.49 | 0.94 | 1.65 | 3.15 |
Steam Pressure | MPa | 0.6 | 0.6 | 0.6 | 0.6 | 0.79 |
Water Evaporation Rate | kg/m2.h | 10-60 | 10-60 | 10-60 | 10-60 | 10-60 |
Outer dimensions (2r * l) | mm | 3295*420 *798 | 4823*873 *1198 | 5781*1120 *1479 | 6860*1468 *1839 |
