Product Introduction:
The drum dryer is composed of a cylindrical shell and a set of drums that run through the center. The drum assembly is hollow, with the heat medium flowing through it to indirectly transfer heat to the sludge. The sludge passes between the drums and the shell, absorbing heat from the drums, evaporating moisture, and the evaporated water vapor collects in the dome above the drums, which is then vented out of the dryer in small amounts.
Disc Dryer Features:
1.Large heat transfer area, compact structure, small volume.
2.Low oxygen content, low temperature, low dust content.
3.Low system load, high reliability.24Continuous operation for hours.
4.Corrosion-resistant, high tensile strength
5.Excellent wear resistance and long service life.
6.Minimal auxiliary equipment, user-friendly operating system.
7.Robust construction, low maintenance requirements, easy to maintain.
8.Suited for semi-dry or dry process.
Product Specifications:
Model | YJG-3 | YJG-8 | YJG-12.5 | YJG-25 | YJG-50 | |
Heat Transfer Area | m2 | 3 | 8 | 12.5 | 25 | 50 |
RPM (revolutions per minute) | r/min | 6-24 | 5-20 | 5-20 | 5-20 | 4-16 |
Power | kw | 1.5 | 4 | 5.5 | 11 | 55 |
Effective Volume | m3 | 0.065 | 0.49 | 0.94 | 1.65 | 3.15 |
Steam Pressure | MPa | 0.6 | 0.6 | 0.6 | 0.6 | 0.79 |
Moisture Evaporation Rate | kg/m2.h | 10-60 | 10-60 | 10-60 | 10-60 | 10-60 |
Outer Dimensions (2r*l) | mm | 3295*420 *798 | 4823*873 *1198 | 5781*1120 *1479 | 6860*1468 *1839 |































