Yiting Explosion-Proof Ceiling Fan Coil
Model: BFP34(KC)
Brand: YingTeng
Airflow (m³): 340
Cooling Capacity (W): 1800
Heat (W): 2700
Noise db(A): ≤37
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power Supply: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 680 x 680 x 390
Explosion-Proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only, please refer to the physical product for accuracy.
1. Cooling condition parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front of and above the equipment in an anechoic chamber.
Ying TengEmbedded explosion-proof fan coil unitThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof ceiling fan coilThe series products are manufactured in accordance with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by explosion-proof enclosures 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Ying TengEmbedded explosion-proof ceiling fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7°C to 43°C, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air in Group II A, II B, T1 to T4.
YingTengEmbedded explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong rust resistance.
The water pan is fully molded, and the insulation uses an integrated bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The cooler uses copper tubes and high-efficiency aluminum fins, mechanically expanded for processing.
Ying TengEmbedded explosion-proof ceiling fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be custom-made upon request to maintain a constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, with ease of disassembly and assembly at the fixed points. The motor leads are all protected by metal hoses, complying with international standards.
Standard coil discharge air outlet static pressure is 0~12Pa, pressure retaining type discharge air outlet static pressure is 30Pa (or ≤50Pa), with code H.
The water pan and insulation are molded, with an overall adhesive process, ensuring durability and no welding marks. The appearance is attractive and lightweight, with no condensation or dripping. The exposed pipe is made from sheet metal produced by Baosteel Shanghai, which is treated with spray painting. The concealed pipe uses galvanized steel or fingerprint-resistant steel plates.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" explosion-proof fan coil series models have been specially processed with explosion-proof technology, making them suitable for flammable and explosive areas in Zones 1 and 2. They are widely used in scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures forming explosive hazards. Wall-mounted explosion-proof fan coils are suitable for areas with temperature requirements. The YingTeng wall-mounted explosion-proof fan coils have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof certificates and explosion-proof CCC certificates. They feature an aesthetically pleasing design, reasonable construction, and ease of installation and maintenance. The entire series is equipped with branded compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-type explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, vertical exposed explosion-proof fan coils, etc.).
