Yiting Explosion-proof Embedded Fan Coil Unit
Model: BFP238(KC)
Brand: YingTeng
Airflow (m³): 2380
Cooling Capacity (W): 12,600
Heat (W): 18900
Noise dB(A): ≤52
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 980 x 980 x 390
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit is the definitive standard.
1. Cold supply operating parameters:进气 dry bulb temperature DB=27°C, wet bulb temperature WB=19.5°C;
Cold water intake temperature: 7℃, outlet water temperature: 12℃.
Heating operating parameters: Inlet air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at a distance of 1 meter from the front and above/below the equipment in an anechoic chamber.
YingTengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres - Part 1: Equipment - General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳“d”"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Ying TengEmbedded explosion-proof fan coilProduct Features
The Yingteng explosion-proof fan coil units include series such as horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, catering to diverse usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is fully molded, and the insulation uses a full-pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The condenser is made by mechanical expansion of copper tubes and high-efficiency aluminum fins.
Ying TengEmbedded explosion-proof fan coil unitThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations of the coils to be freely selected for ordering. Should the user require, an automatic temperature control unit can be specially configured for constant temperature control of the controlled space; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all treated with quenching and hard chrome plating for durability, and the fixed points are easy to disassemble. The motor lead wires are all protected by metal hoses, complying with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring solid durability without weld marks. The appearance is attractive and lightweight, with no condensation or dripping. The exposed pipe is made from sheets produced by Baosteel Shanghai, which are surface-coated, while the concealed pipe is made from galvanized steel or fingerprint-resistant steel.
The coil material is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil casing is lined with sound-absorbing and insulating materials, with the copper tubes arranged in an interlaced pattern, offering extremely high thermal conductivity and low air resistance.
The "YingTeng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for use in flammable and explosive areas of Zones 1 and 2. It is widely applicable in scientific research, oil, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are ideal for environments with temperature requirements. The YingTeng wall-mounted explosion-proof ceiling fans have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof and explosion-proof CCC certificates. They feature an aesthetically pleasing design, reasonable engineering, and are easy to install and maintain. The entire series is equipped with branded compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.)
