YingTeng wall-mounted explosion-proof ceiling fan coil
Product Specifications
Model: BFP204(LM)
Brand: YingTeng
Airflow (m³): 2040
Cooling Capacity (W): 10800
Heat Output (W): 16,200
Noise db(A): ≤50
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1795 x 260 x 640
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product should be used as the standard.
1. Cold supply operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Inlet water temperature: 7℃, outlet water temperature: 12℃。
Heating operation parameters:进口 air dry bulb temperature DB = 21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1-meter distances above and below the front of the equipment in an anechoic chamber.
YitingEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe product series complies with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Ying TengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7°C to 43°C, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
YintengEmbedded explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in various series including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving architectural space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, catering to diverse usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The water pan is fully molded, and the insulation uses a full-pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The heat exchanger is made of copper tubes and high-efficiency aluminum fins, mechanically drawn.
YingTengEmbedded explosion-proof fan coilThe unit is equipped with an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of either left or right hand coils for ordering. Upon customer request, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy assembly and disassembly at the fixed points. The motor leads are protected with metal hoses, in compliance with international standards.
Standard coiled duct outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are molded, with an entire adhesive bonding process, ensuring durability and absence of weld marks; the appearance is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made of sheet metal produced by Shanghai Baosteel, which has been sprayed with plastic coating; the concealed piping is made of galvanized steel or fingerprint-resistant steel.
Coiled materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an alternating pattern, offering superior heat transfer performance and extremely low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 explosive and flammable areas. It is widely used in scientific research, oil, power plants, and other locations where II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are ideal for areas with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fans have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and have been issued explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable construction, and ease of installation and maintenance. The entire series of wall-mounted explosion-proof ceiling fans are equipped with brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).
