Yinteng Inline Ceiling Fan Coil Explosion-Proof Unit
Model: BFP136(LM)
Brand: Yingten
Airflow (m³): 1360
Cooling Capacity (W): 7200
Heat Output (W): 10800
Noise db(A): ≤46
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power Supply: 220V/50Hz
In-and-out piping: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1415 x 260 x 640
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only, and the physical unit shall prevail.
1. Supply cold operating parameters: incoming air dry bulb temperature DB=27°C, wet bulb temperature WB=19.5°C;
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating工况parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃。
2. Noise Measurement: Values measured at a distance of 1 meter in front of and above the equipment in an anechoic chamber.
YintengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YitingEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres - Part 2: Equipment 'd' protected by explosion-proof enclosures"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof ceiling fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7°C to 43°C, free from corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
YingTengEmbedded explosion-proof ceiling fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is molded as a whole, and the insulation is applied using a complete pressure bonding technique, eliminating concerns of condensation.
Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The heat exchanger is made by mechanical tube bending with copper tubes and high-efficiency aluminum fins.
Ying TengEmbedded explosion-proof fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the left and right configurations to be selected at will for ordering. Should the user require, an automatic temperature control device can be customized for恒温 control of the controlled area; (temperature control device to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome, ensuring durability and ease of disassembly at the fixed points. The motor leads are protected with metal hoses, conforming to international standards.
Standard coiled outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring sturdy and durable construction without weld marks. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, which are surface-coated. The concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, suitable for widespread use in Class 1 and Class 2 flammable and explosive areas. It is widely applicable in scientific research, oil, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. The wall-mounted explosion-proof ceiling fan coil is suitable for areas with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fan coil has been inspected and certified by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products, receiving both explosion-proof certification and explosion-proof CCC certification. It features an aesthetically pleasing design, reasonable structure, ease of installation and maintenance. The entire series incorporates brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. It is highly favored in the market. (Customizable options: horizontal concealed explosion-proof ceiling fan coil, horizontal exposed explosion-proof ceiling fan coil, cabinet-type explosion-proof ceiling fan coil, wall-mounted explosion-proof ceiling fan coil, embedded explosion-proof ceiling fan coil, vertical exposed explosion-proof ceiling fan coil, etc.)
