Yingteng Fixed Ceiling Explosion-Proof Ceiling Fan Coil
Model: BFP85(LM)
Brand: YingTeng
Airflow (m³): 850
Cooling Capacity (W): 4500
Heat (W): 6750
Noise level dB(A): ≤43
Cold Water Supply Temperature: 7℃-12℃
Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power: 220V/50Hz
In-and-out pipes: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1080 x 260 x 640
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the actual product should be used as the standard.
1. Cooling condition parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.
Inlet water temperature: 7℃, outlet water temperature: 12℃.
Heating工况parameters: Imported air dry bulb temperature DB=21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at a distance of 1 meter in front and above the equipment in an anechoic chamber.
YingTengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YintengEmbedded explosion-proof ceiling fan coilThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by encased 'm' type"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof ceiling fan coilUnder the following environmental conditions, it operates normally:
a) Altitude not exceeding 2000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosion hazard areas formed by mixtures of flammable gases, vapors, and air in Groups II A, II B, and T1 to T4.
YingTengEmbedded explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is fully molded, and the insulation uses an integral pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
YingTengEmbedded explosion-proof fan coilThe unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be custom-fitted upon request to maintain a constant temperature in the controlled space; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with easy assembly and disassembly at the fixed points. The motor leads are protected with metal hoses, meeting international standards.
The static pressure at the common coiled discharge outlet is 0~12Pa, while the static pressure at the residual pressure discharge outlet is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks, an aesthetically pleasing and lightweight design, no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, with a spray-painted finish, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coiled tubing is made from seamless copper tubing with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The interior of the coil casing is lined with sound-absorbing and insulating material. The copper tubes are arranged in an interlaced pattern, offering exceptional heat transfer performance and extremely low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for use in flammable and explosive areas in Zones 1 and 2. It is widely applicable in scientific research, oil, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are ideal for areas with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fans have been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, receiving both explosion-proof certificates and CCC certificates. They feature an aesthetically pleasing design, reasonable engineering, and are easy to install and maintain. The entire series is equipped with brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. These products are highly favored by the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).
