YingTeng Surface-mounted Explosion-proof Ceiling Fan Coil Unit
Model: BFP102(LM)
Brand: Yingten
Airflow (m³): 1020
Cooling Capacity (W): 5400
Heat Output (W): 8100
Noise db(A): ≤45
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1175 x 260 x 640
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the physical unit shall prevail.
1. Cooling supply parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Cold water intake temperature: 7°C, outlet water temperature: 12°C.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front and above/below the equipment in an anechoic chamber.
YintengEmbedded explosion-proof ceiling fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YintengEmbedded explosion-proof ceiling fan coilThe product series complies with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, T1 to T4 categories.
YingTengEmbedded explosion-proof fan coilProduct Features
The Yinteng explosion-proof ceiling fan coil series includes horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-mounted, and wall-mounted models.
Low overall height, saving construction space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, catering to various usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The water collection tray is fully molded, and the insulation uses an integrated bonding process, eliminating concerns about condensation water.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.
YingTengEmbedded explosion-proof ceiling fan coilThe unit features an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, meeting international standards.
The static pressure of the ordinary coiled outlet is 0~12Pa, while the static pressure of the residual pressure outlet is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are made by molding, with an overall adhesive process, ensuring durability and no welding marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface-coated with plastic spray, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coiled material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing insulation material, featuring copper tubes arranged in an alternating pattern, offering exceptional thermal conductivity and low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for use in Class 1 and 2 flammable and explosive environments. It is widely applicable in scientific research, oil, power plants, and other locations where II A, IIB, T1-T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are ideal for areas with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fans have been inspected and certified by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products, receiving both explosion-proof certification and explosion-proof CCC certification. They feature an aesthetically pleasing design, reasonable structure, and are easy to install and maintain. The full series is equipped with brand-name compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and high safety reliability, making them highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, vertical exposed explosion-proof ceiling fans, etc.)
