YingTeng wall-mounted explosion-proof ceiling fan coil
Product Specifications
Model: BFP170(LM)
Brand: YingTeng
Airflow (m³): 1700
Cooling Capacity (W): 9000
Heat Output (W): 13,500
Noise db(A): ≤48
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power Supply: 220V/50Hz
In and Out Water Pipes: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1680 x 260 x 640
Explosion-proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only, the actual product should be used as the standard.
1. Cooling condition parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operation parameters: Inlet air dry bulb temperature DB=21℃, inlet water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter in front and above/below the equipment in an anechoic chamber.
YitingEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by “m” type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, T1 to T4.
YingTengEmbedded explosion-proof fan coilProduct Features
The YingTeng explosion-proof ceiling fan coil series includes: horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more.
Low overall height, saving construction space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The water pan is formed as a whole by pressure molding, and heat preservation is achieved through an integrated pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The evaporator is made by mechanical tube bending with copper tubes and high-efficiency aluminum fins.
YingTengEmbedded explosion-proof fan coilThe unit is equipped with an efficient aluminum finned heat exchanger and a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for the selection of left or right-hand spiral coils for ordering. An automatic temperature control unit can be provided upon request for maintaining constant temperature in controlled spaces; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat treated and chrome-plated for durability, with ease of disassembly at fixed points. The motor leads are protected by metal hoses, in compliance with international standards.
Standard coiled discharge outlet static pressure is 0~12Pa, while the residual pressure discharge outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are molded, with an overall adhesive process, ensuring solid and durable construction with no weld marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Shanghai Baosteel, which are spray-painted, while the concealed piping uses galvanized steel or fingerprint-resistant panels.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" explosion-proof fan coil series models have been specially processed with explosion-proof technology, making them suitable for wide applications in flammable and explosive areas classified as Zones 1 and 2, such as scientific research, oil, and power plants where there is or may be II A, IIB, T1 to T4 groups of combustible gases, steam, and air mixtures prone to explosion. Wall-mounted explosion-proof fan coils are ideal for spaces with temperature requirements. The YingTeng wall-mounted explosion-proof fan coils have been inspected and certified by the National Supervisory and Inspection Center for Quality of Explosion-Proof Electrical Products, receiving both explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The entire series incorporates brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. These models are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.)
