Yiting Vertical Cabinet Surface-Mounted Explosion-Proof Ceiling Fan Coil
Model: BFP68(LM)
Brand: YingTeng
Airflow (m³): 680
Cooling Capacity (W): 3600
Heat Output (W): 5400
Noise dB(A): ≤41
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power Supply: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 980 x 260 x 640
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is the definitive standard.
1. Cold supply conditions parameters: inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃;
Inlet water temperature for cold water: 7℃, outlet water temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
YintengEmbedded explosion-proof fan coil unitThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type encapsulation"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Ying TengEmbedded explosion-proof ceiling fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazardous areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, T1 to T4.
YingTengEmbedded explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hung types.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The whole unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong rust prevention.
The drip pan is fully molded, and the insulation uses a whole-pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical brazing of copper tubes and high-efficiency aluminum fins.
YitingEmbedded explosion-proof ceiling fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for the selection of either left or right-style coils for ordering. If required by the customer, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are all tempered and treated with special hard chrome plating for durability, and are easy to disassemble at fixed points. The motor leads are all protected by metal hoses, complying with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, which are surface-plastic coated, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coil material is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, offering exceptional heat transfer performance and low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 hazard zones with flammable and explosive environments. It is widely used in scientific research, oil, and power plants where IIa, Iib group combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are suitable for locations with temperature requirements. The Yingteng wall-mounted explosion-proof ceiling fans have passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center and received explosion-proof certification and CCC certification. They feature an aesthetically pleasing design, reasonable structure, ease of installation and maintenance. The entire series uses branded compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-type explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, vertical exposed explosion-proof ceiling fans, etc.)
