YingTeng Explosion-proof Embedded Ceiling Fan Coil
Model: BFP68(KC)
Brand: YingTeng
Airflow (m³): 680
Cooling Capacity (W): 3600
Heat Output (W): 5400
Noise level dB(A): ≤41
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power Supply: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 680 x 680 x 390
Explosion-proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit shall prevail.
Supply Cold Operation Parameters: Inlet Air Dry Bulb Temperature DB=27℃, Wet Bulb Temperature WB=19.5℃
Cold water inlet temperature: 7°C, outlet temperature: 12°C.
Heating operating parameters: Inlet air dry bulb temperature DB=21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
YingTengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres - Part 1: Equipment - General Requirements"
GB/T 3836.2 -2021 "Explosive Atmospheres Part 2: Equipment protected by explosion-proof "d" enclosures"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof ceiling fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000 meters.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
YingTengEmbedded explosion-proof ceiling fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The complete unit is made of hot-dipped galvanized sheet, copper pipes, and aluminum fins, offering strong corrosion resistance.
The drip pan is fully molded, and the insulation employs a whole-pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The heat exchanger is made from copper tubes and high-efficiency aluminum fins, mechanically expanded.
Ying TengEmbedded explosion-proof fan coilThe unit features an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of either left or right-style coils for ordering. If required by the customer, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are all treated with quenching and hard chrome, ensuring durability and easy disassembly at fixed points. The motor leads are protected by metal hoses, conforming to international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability, and no weld marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from plates produced by Baosteel Shanghai, which are surface-plastic coated, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.
The "Yingteng" explosion-proof air-cooled ceiling fan coil series has been processed with special explosion-proof technology and is widely applicable in Class 1 and 2 flammable and explosive environments. It is suitable for scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam-air mixtures, or explosion hazards. Wall-mounted explosion-proof fan coil units are ideal for areas with temperature requirements. The Yingteng wall-mounted explosion-proof fan coil units have been inspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center with explosion-proof certificates and CCC explosion-proof certifications. They feature attractive appearance, reasonable design, and are easy to install and maintain. The full series of wall-mounted explosion-proof fan coils are equipped with brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and reliable safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, flush-mounted explosion-proof fan coils, vertical exposed explosion-proof fan coils, etc.)
