YingTeng Explosion-proof Embedded Ceiling Fan Coil
Model: BFP85(KC)
Brand: YingTeng
Airflow (m³): 850
Cooling Capacity (W): 4500
Heat Output (W): 6750
Noise level dB(A): ≤43
Cold water supply temperature: 7°C - 12°C
Supplying hot water temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 830 x 830 x 390
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the actual unit should be taken as the standard.
1. Cooling supply parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Cold water inlet temperature: 7°C, outlet temperature: 12°C.
Heating operating parameters:进口 air dry bulb temperature DB=21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter distance from the front and above/below the equipment within an anechoic chamber.
YingTengEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
Ying TengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 "d""
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type encapsulation"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coil unitOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air in Groups II A, II B, T1 to T4.
YitingEmbedded explosion-proof ceiling fan coilProduct Features
The Yinteng explosion-proof ceiling fan coil series includes: horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hanging types.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for variable air volume control, meeting various application requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.
The overall mold-formed drip pan, with overall pressure bonding technology for insulation, eliminates the worry of condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The condenser is made by mechanical expansion of copper tubes and high-efficiency aluminum fins.
YingTengEmbedded explosion-proof fan coilThe unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the left and right configurations of the coils to be ordered at will. If required by the customer, an automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, with easy disassembly at the fixed points. The motor leads are protected with metal hoses, compliant with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an entire adhesive bonding process, ensuring sturdy and durable construction without any weld marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from sheets produced by Baosteel Shanghai, which are surface-coated, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel plates.
The coil material is made from seamless copper tubes with aluminum finned strips, formed through hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlocking pattern, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" explosion-proof fan coil series has been specially processed with explosion-proof technology, suitable for widespread use in Class 1 and Class 2 flammable and explosive areas. It is ideal for scientific research, oil, power plants, and other locations where II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof fan coils are suitable for areas with temperature requirements. The YingTeng wall-mounted explosion-proof fan coil has been inspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, with both explosion-proof and CCC certification. It features an aesthetically pleasing design, reasonable engineering, and easy installation and maintenance. The full series of wall-mounted explosion-proof fan coils are equipped with branded compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and high safety reliability, making them popular in the market. (Customizable: horizontal concealed explosion-proof fan coil, horizontal exposed explosion-proof fan coil, cabinet-type explosion-proof fan coil, wall-mounted explosion-proof fan coil, embedded explosion-proof fan coil, vertical exposed explosion-proof fan coil, etc.).
