YingTeng Explosion-proof Fan Coil Unit for Embedded Application
Model: BFP170(KC)
Brand: YingTeng
Airflow (m³): 1700
Cooling Capacity (W): 9000
Heat (W): 13,500
Noise level dB(A): ≤48
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 980 x 980 x 390
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the actual product should be used as the standard.
1. Cooling supply conditions: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operation parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front and above/below the equipment in an anechoic chamber.
YitingEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof fan coilThe series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by cast-in type 'm'"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7°C to 43°C, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air in Groups II A, II B, T1 to T4.
YitingEmbedded explosion-proof ceiling fan coilProduct Features
The Yingteng explosion-proof fan coil units include wall-mounted horizontal, concealed horizontal, vertical wall-mounted, ceiling-mounted, cabinet-style, and wall-hung series.
Low overall height, saving architectural space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.
The drip pan is formed as a whole through vacuum forming, and the insulation is applied using an integral pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensures thorough heat exchange and prevents pipe cracking due to freezing.
The condenser is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.
YingTengEmbedded explosion-proof fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of left or right-style coils for ordering. Optionally, an automatic temperature control unit can be custom-made for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, with ease of disassembly at the fixed points. The motor leads are all protected by metal flexible hoses, complying with international standards.
Standard coiled duct outlet static pressure is 0~12Pa, while the residual pressure type outlet static pressure is 30Pa (or ≤50Pa), code H.
The water pan and insulation are molded, with an overall adhesive bonding process, ensuring durability and absence of weld marks; the appearance is beautiful and lightweight, with no condensation or dripping. The exposed piping is made of sheet metal produced by Shanghai Baosteel, which has been spray-painted, while the concealed piping is made of galvanized steel or fingerprint-resistant steel.
Coiled tubing materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The interior of the coil box is lined with sound-absorbing and insulating materials. The copper tubes are arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.
The "Yingteng" explosion-proof fan coil series has been specially processed with explosion-proof technology, making it suitable for 1st and 2nd zone flammable and explosive environments. It is widely used in scientific research, oil, and power plants where there may be or could be II A, II B, T1 to T4 group combustible gases, steam, and air mixtures forming explosive hazards. Wall-mounted explosion-proof fan coils are suitable for locations with temperature requirements. The Yingteng wall-mounted explosion-proof fan coil has been inspected and certified by the National Supervision and Inspection Center for Explosion-Proof Electrical Product Quality, and holds both explosion-proof and CCC certificates. It features an aesthetically pleasing design, reasonable engineering, and is easy to install and maintain. The entire series of wall-mounted explosion-proof fan coils are equipped with brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, vertical exposed explosion-proof fan coils, etc.)
