Yinteng Explosion-Proof Ceiling Fan Coil Unit
Model: BFP136(KC)
Brand: YingTeng
Airflow (m³): 1360
Cooling Capacity (W): 7200
Heat (W): 10800
Noise level dB(A): ≤46
Cold Water Supply Temperature: 7℃-12℃
Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Water Pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 830 x 830 x 390
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit is the definitive standard.
1. Cold supply operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operation parameters: Inlet air dry bulb temperature DB=21℃, water inlet temperature 60°C.
2. Noise Measurement: Values measured at 1 meter forward and 1 meter above/below the equipment in an anechoic chamber.
YitingEmbedded explosion-proof fan coilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTengEmbedded explosion-proof ceiling fan coilThe series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTengEmbedded explosion-proof fan coilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Applicable environmental conditions: Temperature -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors from Group II A, II B, and T1 to T4 categories with air.
YingTengEmbedded explosion-proof ceiling fan coilProduct Features
The YingTeng explosion-proof ceiling fan coil series includes: horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, wall-mounted, and more.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The water pan is formed in one piece by vacuum forming, and heat insulation is achieved through a full-pressure bonding process, eliminating concerns about condensation water.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
YingTengEmbedded explosion-proof ceiling fan coilThe unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, conforming to international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface treated with spray painting, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
Coiled tubing materials are made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 hazard zones with flammable and explosive environments. It is widely used in scientific research, oil, and power plants where II A, II B, T1-T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof ceiling fans are ideal for areas with temperature requirements. The YingTeng wall-mounted explosion-proof ceiling fans have been inspected and certified by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products, receiving both explosion-proof and CCC certificates. They feature an aesthetically pleasing design, reasonable construction, and are easy to install and maintain. The full series of wall-mounted explosion-proof ceiling fans are equipped with branded compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal surface-mounted explosion-proof ceiling fans, cabinet-type explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, flush-mounted explosion-proof ceiling fans, and vertical surface-mounted explosion-proof ceiling fans, etc.).
