Inten Wall-Mounted Explosion-Proof Ceiling Fan Coil
Model: FP85(BG)
Brand: YingTeng
Airflow (m³): 850
Cooling Capacity (W): 4500
Heat (W): 6750
Noise level dB(A): ≤43
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power: 220V/50Hz
In and Out Pipe: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1030 x 180 x 300
Explosion-proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the actual unit is the standard.
1. Cooling supply conditions parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB=21℃, incoming water temperature 60℃。
2. Noise Measurement: Values measured at 1 meter in front and above/below the equipment in an anechoic chamber.
YingTeng wall-mounted explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
This product series complies with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Wall-mounted explosion-proof fan coil units can operate normally under the following environmental conditions:
a) Altitude not exceeding 2,000 meters.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Wall-mounted explosion-proof fan coilProduct Features
The YingTeng explosion-proof fan coil units include series such as horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-mounted, and wall-hung.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meeting various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.
The water tray is molded in one piece, with overall pressure bonding technology for insulation, free from concerns of condensation water.
Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the selection of either left or right-hand coils for ordering. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all tempered and treated with hard chrome for durability, and are easy to disassemble at the fixed points. The motor leads are protected with metal hoses, compliant with international standards.
Standard coil outlet air static pressure is 0~12Pa, while the remaining pressure outlet air static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive process, ensuring sturdy durability without weld marks, an aesthetically pleasing and lightweight design, no condensation or dripping; the exposed pipeline is made from sheet metal produced by Shanghai Baosteel, with a sprayed plastic coating, while the concealed pipeline uses galvanized steel or fingerprint-resistant steel plates.
Coiled materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an alternating pattern, offering excellent heat transfer performance and low air resistance.
The "YingTeng" wall-mounted explosion-proof fan coil series has been processed with special explosion-proof technology and is widely applicable in Class 1 and 2 flammable and explosive environments. It is suitable for research institutions, oil fields, power plants, and other locations where there is or may be IIa, Iib Group T1 to T4 combustible gas, steam, and air mixtures forming explosion hazards. The wall-mounted explosion-proof fan coil is suitable for areas with temperature requirements. The YingTeng wall-mounted explosion-proof fan coil has been inspected and certified by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Product Quality and issued with explosion-proof and explosion-proof CCC certificates. It boasts a beautiful appearance, reasonable design, easy installation and maintenance. The entire series is equipped with brand-name compressors, microcomputer intelligent control, digital display, and features low noise, stable performance, simple operation, and safety. It is highly favored by the market. (Customizable: horizontal concealed explosion-proof fan coil, horizontal exposed explosion-proof fan coil, cabinet-style explosion-proof fan coil, wall-mounted explosion-proof fan coil, embedded explosion-proof fan coil, vertical exposed explosion-proof fan coil, etc.).
