Yiting Wall-Mounted Explosion-Proof Ceiling Fan Coils
Model: FP102(BG)
Brand: YingTeng
Airflow (m³): 1020
Cooling Capacity (W): 5400
Heat (W): 8100
Noise level dB(A): ≤45
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 1030 x 180 x 300
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual unit is the standard.
1. Cooling condition parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7°C, outlet temperature: 12°C.
Heating operating parameters: Inlet air dry bulb temperature DB=21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at a distance of 1 meter above and below the front of the equipment in an anechoic chamber.
The Yingteng wall-mounted explosion-proof fan coil has the explosion-proof mark Ex db IIB T4 Gb.
This series of products complies with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 "d""
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres - Part 9: Equipment protected by "m" type encapsulation"
GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"
Wall-mounted explosion-proof fan coil units can operate normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Wall-mounted explosion-proof ceiling fan coilProduct Features
The YingTeng explosion-proof ceiling fan coil series includes卧式明装,卧式暗装,立式明装,立式暗装,ceiling-mounted, cabinet-style, and wall-mounted models.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The complete unit is made of hot-dip galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is fully molded, and the insulation uses an integrated pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical expansion of copper tubes and high-efficiency aluminum fins.
The unit features an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of left or right coils for ordering. An optional automatic temperature control unit can be provided upon request to maintain constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are all heat-treated and hard-chromed for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, conforming to international standards.
Standard coiled outlet air pressure is 0~12Pa, while the residual pressure outlet air pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The appearance is attractive and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, surface treated with electrostatic powder coating, while the concealed piping is made from galvanized steel or fingerprint-resistant steel sheets.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlocking pattern, providing exceptional heat transfer performance and low air resistance.
The "Yingteng" wall-mounted explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for widespread use in flammable and explosive areas in Zones 1 and 2. They are ideal for research institutions, oil refineries, chemical industries, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof fan coils are suitable for environments with temperature requirements. The Yingteng wall-mounted explosion-proof fan coils have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and have been issued explosion-proof certification and CCC certification. They feature an attractive appearance, reasonable design, and easy installation and maintenance. The full range of wall-mounted explosion-proof fan coils are equipped with branded compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).
