Yiting Wall-Mounted Explosion-Proof Ceiling Fan Coil
Model: FP68(BG)
Brand: Yingten
Airflow (m³): 680
Cooling Capacity (W): 3600
Heat Output (W): 5400
Noise level dB(A): ≤41
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In-and-out pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 880 x 190 x 300
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is to be taken as the standard.
1. Cooling supply conditions parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1-meter distances from the front and above/below the equipment in an anechoic chamber.
YingTeng wall-mounted explosion-proof fan coil has the explosion-proof marking of Ex db IIB T4 Gb.
This series of products complies with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety "i""
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by cast-in "m" type"
GB/T 3836.15-2017 "Explosive Atmospheres Part 15: Design, Selection, and Installation of Electrical Equipment"
Wall-mounted explosion-proof fan coil units can operate normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are hazardous areas with flammable gases, vapors, and air mixtures capable of causing explosions, categorized as Class II, Group A, B, and T1 to T4.
Wall-mounted explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The water collection pan is fully molded, with insulation using an integral pressure bonding process, eliminating concerns of condensation.
Equipped with exhaust and draining functions, ensuring full heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
The unit employs an efficient aluminum finned heat exchanger with a low-noise fan configuration, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of left or right-style coils for ordering. An automatic temperature control unit can be custom-fitted upon request to maintain a constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are all heat treated and chrome-plated for durability and ease of disassembly at the fixed points. The motor leads are protected with metal hoses, complying with international standards.
Standard coil outlet static pressure is 0~12Pa, pressure remaining outlet static pressure is 30Pa (or ≤50Pa), code H.
The water pan and insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks, a beautiful and lightweight appearance, no condensation or dripping; the exposed piping is made from steel sheets produced by Shanghai Baosteel, with a spray painting finish, while the concealed piping is made from galvanized steel or fingerprint-resistant steel sheets.
Coiled materials are made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, boasting exceptional heat transfer performance and extremely low air resistance.
The "Yingteng" wall-mounted explosion-proof fan coil series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 risk zones with flammable and explosive environments. It is widely used in scientific research, oil, chemical, power plants, and other locations where II A, IIB class T1 to T4 combustible gases, steam, and air mixtures pose explosion hazards. Wall-mounted explosion-proof fan coils are ideal for applications with temperature requirements. The Yingteng wall-mounted explosion-proof fan coil has passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center and been issued with explosion-proof certification and CCC certification. It boasts an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The entire series features brand-name compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and safety, making it highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coil, horizontal exposed explosion-proof fan coil, cabinet-style explosion-proof fan coil, wall-mounted explosion-proof fan coil, embedded explosion-proof fan coil, vertical exposed explosion-proof fan coil, etc.)
