Yiting Wall-Mounted Explosion-Proof Ceiling Fan Coil
Model: BFP51(BG)
Brand: Yingten
Airflow (m³): 510
Cooling Capacity (W): 2700
Heat Output (W): 4050
Noise db(A): ≤39
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 800 x 160 x 290
Explosion-Proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Appliances Co., Ltd.
Note: The above technical parameters are for reference only, the physical machine is to be taken as the standard.
1. Supply Cooling Condition Parameters: Inlet Dry Bulb Temperature DB=27℃, Wet Bulb Temperature WB=19.5℃;
Cold water intake temperature: 7℃, outlet water temperature: 12℃.
Heating operating parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
YingTeng wall-mounted explosion-proof fan coil has the explosion-proof mark Ex db IIB T4 Gb.
The following standards are followed for this series of products:
GB/T 3836.1 - 2021 "Explosive Atmospheres - Part 1: Equipment - General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by intrinsic safety 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres Part 15: Design, Selection, and Installation of Electrical Equipment"
The wall-mounted explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are hazardous explosive areas formed by mixtures of flammable gases, vapors, and air in groups II A, II B, and T1 to T4.
Wall-mounted explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving architectural space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is formed by a whole molding process, and the insulation is applied using an integral pressure bonding technique, eliminating concerns of condensation.
Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical drawing with copper tubes and high-efficiency aluminum fins.
The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the selection of either left or right-style coils for ordering. An automatic temperature control unit can be optionally provided for恒温 control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability and ease of disassembly at the fixed points. The motor leads are protected with metal hoses, compliant with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability with no welding marks, an aesthetically pleasing and lightweight design, and no condensation or dripping; the exposed pipe is made from sheets produced by Baosteel Shanghai, surface treated with spray painting, while the concealed pipe uses galvanized steel or fingerprint-resistant steel sheets.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" wall-mounted explosion-proof air-cooled coil series has been processed with special explosion-proof technology, making it suitable for 1 and 2 zones prone to flammable and explosive environments. It is widely used in scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures that pose explosion hazards. Wall-mounted explosion-proof air-cooled coils are suitable for areas with temperature requirements. The YingTeng wall-mounted explosion-proof air-cooled coils have passed inspections by the National Quality Supervision and Inspection Center for Explosion-proof Electrical Products and been issued explosion-proof certification and CCC certification. They feature an attractive appearance, reasonable design, and easy installation and maintenance. The full series is equipped with brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof air-cooled coils, horizontal exposed explosion-proof air-cooled coils, cabinet-style explosion-proof air-cooled coils, wall-mounted explosion-proof air-cooled coils, flush-mounted explosion-proof air-cooled coils, vertical exposed explosion-proof air-cooled coils, etc.).
