YingTeng Wall-Mounted Explosion-Proof Ceiling Fan Coil
Model: BFP34(BG)
Brand: YingTeng
Airflow (m³): 340
Cooling Capacity (W): 1800
Heat (W): 2700
Noise db(A): ≤37
Cold Water Supply Temperature: 7°C - 12°C
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 785 x 150 x 290
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, please refer to the actual product.
1. Cooling supply parameters: Inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front of and above the equipment in an anechoic chamber.
YingTeng wall-mounted explosion-proof fan coil has the explosion-proof mark Ex db IIB T4 Gb.
This series of products adheres to the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres - Part 1: Equipment - General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres - Part 2: Equipment protected by explosion-proof "d"隔爆外壳"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The wall-mounted explosion-proof ceiling fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Wall-mounted explosion-proof fan coilProduct Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving construction space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The water pan is formed through a whole molding process, and heat preservation is achieved using a whole pressing and bonding technique, eliminating concerns about condensation water.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline freezing cracks.
The cooler is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
The unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for the selection of left or right-style coils for ordering. An automatic temperature control device can be custom-fitted upon request for constant temperature control of the controlled area; (temperature control device to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can be self-lubricated. The motor shafts are all heat-treated and hard-chromium treated for durability and ease of disassembly at fixed points. The motor leads are protected with metal hoses, meeting international standards.
Standard coiled discharge outlet static pressure is 0~12Pa, while the residual pressure discharge outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are made by molding, featuring an overall adhesive process for durability without weld marks. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed pipe fittings are made of steel plates produced by Shanghai Baosteel, with a spray painting finish. The concealed pipe fittings are made of galvanized steel or fingerprint-resistant steel.
Coiled tubing materials are made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil casing is lined with sound-absorbing and insulating materials, featuring a copper tube arrangement with minimal air resistance and exceptional heat transfer performance.
The "YingTeng" wall-mounted explosion-proof fan coil series has been specially processed with explosion-proof technology, making it suitable for 1 and 2 hazard zones with flammable and explosive environments. It is widely used in scientific research, oil, power plants, and other locations where IIA, IIB class T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. Wall-mounted explosion-proof fan coils are ideal for areas with temperature requirements. The YingTeng wall-mounted explosion-proof fan coil has passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center and been issued with explosion-proof certification and CCC certification. It boasts an aesthetically pleasing design, reasonable structure, and easy installation and maintenance. The entire series features brand-name compressors, microcomputer intelligent control, digital display, low noise, stable performance, simple operation, and safety. It is highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coil, horizontal exposed explosion-proof fan coil, cabinet-style explosion-proof fan coil, wall-mounted explosion-proof fan coil, embedded explosion-proof fan coil, vertical exposed explosion-proof fan coil, etc.)
