Yingteng Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP204(WM)
Brand: YingTeng
Airflow (m³): 2040
Cooling Capacity (W): 10800
Heat (W): 16,200
Noise level dB(A): ≤50
Cold Water Supply Temperature: 7℃-12℃
Supplying Hot Water Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1795 x 500 x 250
Explosion-proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual unit shall be the standard.
1. Cooling supply parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Inlet water temperature: 7℃, outlet water temperature: 12℃。
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1-meter intervals in front of and above the equipment in an anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
YingTeng explosion-proof ceiling fan coil series products are manufactured in accordance with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳“d”"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres – Part 15: Design, Selection and Installation of Electrical Equipment"
The Yinteng explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, T1 to T4.
YingTeng Explosion-Proof Ceiling Fan Coil Unit Product Features
The YingTeng explosion-proof ceiling fan coil series includes horizontal exposed, horizontal concealed, vertical exposed, vertical concealed, overhead, cabinet-mounted, and wall-hung types.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, catering to various usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong rust resistance.
The drip pan is molded as a whole, with insulation using a whole-press bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The cooler is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
YingTeng explosion-proof ceiling fan coil units are equipped with high-efficiency aluminum fin heat exchangers and low-noise fans, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the left and right configurations of the coils to be selected as desired. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all treated with quenching and special hard chrome plating for durability, with easy disassembly at fixed points. The motor leads are all protected by metal hoses, meeting international standards.
Standard coil outlet static pressure is 0~12Pa, while the remaining pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring solid durability without weld marks. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed pipe is made from sheets produced by Baosteel Shanghai, which are coated with plastic. The concealed pipe is made from galvanized steel or fingerprint-resistant steel.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil housing is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "YingTeng" explosion-proof ceiling fan coil series has been processed with special explosion-proof technology, making it suitable for use in flammable and explosive areas in Zones 1 and 2. It is widely applicable in scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures that pose explosion hazards. YingTeng explosion-proof ceiling fans are suitable for environments with temperature requirements. They have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and have been issued explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable structure, and are easy to install and maintain. The entire series uses brand-name compressors, microcomputer intelligent control, digital display, and offers advantages such as low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).
