Yinteng Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP170(WM)
Brand: Yingten
Airflow (m³): 1700
Cooling Capacity (W): 9000
Heat (W): 13,500
Noise db(A): ≤48
Cool Water Supply Temperature: 7℃-12℃
Supplying hot water temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power: 220V/50Hz
In-and-out pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1680 x 500 x 250
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the actual unit is the standard.
1. Cooling supply conditions: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7°C, outlet temperature: 12°C.
Heating operation parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at a distance of 1 meter in front and above the equipment, within an anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
YingTeng explosion-proof ceiling fan coil series products are in compliance with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment - General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by explosion-proof "d"隔爆外壳"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by encased 'm' type"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yingteng Explosion-proof Ceiling Fan Coil can operate normally under the following environmental conditions:
a) Altitude not exceeding 2,000m;
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are hazardous areas where flammable gases, vapors, and air mixtures from Groups II A, II B, T1 to T4 can form explosive conditions.
Yinteng Explosion-Proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.
The water pan is fully molded, and the insulation uses a whole-pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The cooler is made of copper tubes and high-efficiency aluminum fins, mechanically drawn together.
The YingTeng explosion-proof fan coil unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for the selection of either left or right hand coils for ordering. If required by the customer, an automatic temperature control unit can be provided for constant temperature control of the controlled space; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are all heat-treated and chrome-plated for durability, with ease of disassembly at the fixed points. The motor leads are protected by metal hoses, meeting international standards.
Standard coiled discharge outlet static pressure is 0~12Pa, while the residual pressure type discharge outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water pan and insulation are molded, with an entire adhesive bonding process, ensuring durability without any weld marks. The appearance is beautiful and lightweight, with no condensation or dripping. The exposed pipe fittings are made from steel plates produced by Shanghai Baosteel, which are coated with plastic spray. The concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel plates.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology and is widely applicable in flammable and explosive areas of Zones 1 and 2. It is suitable for research institutions, oil fields, power plants, and other locations where II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures may form explosive hazards. Yingteng explosion-proof ceiling fans are ideal for environments with temperature requirements. They have passed inspection by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and been issued with explosion-proof certificates and CCC certificates. These fans feature an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The full range of explosion-proof ceiling fans use brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-style explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).
