Yinteng Wall-Mounted Explosion-Proof Ceiling Fan Coil
Model: BFP102(LG)
Brand: YingTeng
Airflow (m³): 1020
Cooling Capacity (W): 5400
Heat Output (W): 8100
Noise dB(A): ≤45
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 520 x 255 x 1510
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit shall be the criterion.
1. Cooling工况parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Inlet water temperature for cold water: 7℃, outlet water temperature: 12℃.
Heating operation parameters: Imported dry bulb air temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at a distance of 1 meter above and below the front of the equipment in an anechoic chamber.
Yinteng Wall-Mounted Explosion-Proof Ceiling Fan CoilThe explosion-proof marking is Ex db IIB T4 Gb.
YingTeng Wall-Mounted Explosion-Proof Ceiling Fan CoilThe product series complies with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳“d”"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
Yinteng Wall-Mounted Explosion-Proof Ceiling Fan CoilOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Applicable environment: temperature -7°C to 43°C, free of corrosive gases.
c) There are hazardous areas with flammable gases, vapors, and air mixtures capable of explosion, classified as II A, II B, and T1 to T4 groups.
YingTeng Wall-Mounted Explosion-Proof Ceiling Fan CoilProduct Features
The Yingteng explosion-proof fan coil units come in various series including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hung types.
Low overall height, saving architectural space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong rust resistance.
The drip pan is fully molded, and the insulation uses an integrated pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The cooler uses copper tubes and high-efficiency aluminum fins, mechanically expanded for processing.
Yiting Fixed Cabinet Explosion-Proof Ceiling Fan CoilThe set utilizes an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for the left and right configurations of the coil to be ordered as desired. If required by the customer, an automatic temperature control unit can be optionally provided for maintaining a constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat-treated and chrome-plated for durability, with ease of disassembly at fixed points. The motor leads are protected by metal hoses, meeting international standards.
Standard coiled outlet air pressure is 0~12Pa, while the residual pressure outlet air pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring solid durability and no welding marks. The exterior is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from sheets produced by Shanghai Baosteel, which are surface treated with electrostatic powder coating. The concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel.
The coiled material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, with the copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and minimal air resistance.
The "YingTeng" explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for widespread use in Class 1 and 2 flammable and explosive environments. They are ideal for research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures that pose explosion hazards.Yiting Fixed-Position Explosion-Proof Ceiling Fan CoilSuitable for locations with temperature requirements.Yinteng Wall-Mounted Explosion-Proof Ceiling Fan CoilInspected and certified by the National Explosion-Proof Electrical Equipment Quality Supervision and Inspection Center with explosion-proof certification and CCC certificate; featuring an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance, our full series of wall-mounted explosion-proof fan coil units are equipped with brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and reliable safety, making them highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coil units, horizontal exposed explosion-proof fan coil units, cabinet-style explosion-proof fan coil units, wall-mounted explosion-proof fan coil units, embedded explosion-proof fan coil units, and vertical exposed explosion-proof fan coil units, etc.).
