YingTeng Wall-Mounted Explosion-Proof Ceiling Fan Coil Unit
Model: BFP136(LG)
Brand: YingTeng
Airflow (m³): 1360
Cooling Capacity (W): 7200
Heat (W): 10800
Noise db(A): ≤46
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 530 x 285 x 1750
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, the actual unit is the standard.
1. Cooling supply conditions parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating operating parameters:进口 air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
The Ex db IIB T4 Gb explosion-proof label is on YingTeng's wall-mounted explosion-proof fan coil.
The Yinteng wall-mounted explosion-proof fan coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The YingTeng wall-mounted explosion-proof ceiling fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m;
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are hazardous areas with II A, II B, T1 to T4 groups of flammable gases, vapors, and air mixtures that pose an explosion risk.
Yinteng Wall-Mounted Explosion-Proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The drip pan is formed by a whole mold, and the insulation is achieved through a whole pressure bonding process, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The evaporator is made of copper tubes and high-efficiency aluminum fins, processed by mechanical bending.
The Yingteng wall-mounted explosion-proof air-cooled water-cooled fan coil unit features an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange to maximize the heat exchanger's thermal transfer efficiency.
Precise design allows for either left or right-hand coil ordering as desired. Optional automatic temperature control units can be provided for consistent temperature control in controlled spaces; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, featuring imported high-precision steel ball bearings that can be self-lubricated. The motor shafts are all tempered and treated with special hard chrome, ensuring durability and ease of disassembly at the fixed points. The motor leads are all protected with metal hoses, conforming to international standards.
The static pressure at the ordinary coiled duct outlet is 0~12Pa, while the static pressure at the remaining pressure type outlet is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability without weld marks, and an aesthetically pleasing, lightweight design; no condensation or dripping. The exposed piping is made from sheets produced by Baosteel Shanghai, with a spray-painted finish, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coiled material is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The body of the coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and extremely low air resistance.
The "YingTeng" explosion-proof fan coil series models have been processed with special explosion-proof technology, making them suitable for widespread use in flammable and explosive areas of Zones 1 and 2. They are ideal for research, oil, and power plant environments where IIA, IIB, T1-T4 groups of combustible gases, steam, and air mixtures may pose explosion hazards. The YingTeng wall-mounted explosion-proof fan coil is suitable for spaces with temperature requirements. It has passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, receiving explosion-proof certification and CCC certification. The coils feature an aesthetically pleasing design, reasonable engineering, ease of installation and maintenance. The full series of wall-mounted explosion-proof fan coils are equipped with brand-name compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coil, horizontal exposed explosion-proof fan coil, cabinet-style explosion-proof fan coil, wall-mounted explosion-proof fan coil, embedded explosion-proof fan coil, vertical exposed explosion-proof fan coil, etc.)
