Yinteng Horizontal Surface-Mount Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP85(WM)
Brand: YingTeng
Airflow (m³): 850
Cooling Capacity (W): 4500
Heat (W): 6750
Noise db(A): ≤43
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Water Pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1080 x 500 x 250
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, please refer to the physical unit for accuracy.
1. Cold supply operating parameters: inlet dry bulb temperature DB = 27℃, wet bulb temperature WB = 19.5℃.
Inlet cold water temperature: 7°C, outlet water temperature: 12°C.
Heating operating parameters:进口 air dry bulb temperature DB=21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
The Yinteng explosion-proof ceiling fan coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres – Part 2: Equipment protected by explosion-proof enclosures 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yingteng explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are hazardous explosive areas formed by mixtures of flammable gases, vapors from Group II A, II B, and T1 to T4, with air.
Inten Explosion-proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving space in construction.
High cooling (heating) capacity, low noise, three-speed motor to adjust air volume, meets various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The drip pan is fully molded for a seamless design, and the insulation employs a full-pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking due to freezing.
The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.
YingTeng explosion-proof fan coil units are equipped with high-efficiency aluminum finned heat exchangers and low-noise fans, enhancing heat exchange to maximize the heat exchanger's thermal transfer efficiency.
精密 design allows for the left and right configurations to be selected at will for ordering. An automatic temperature control unit can be optionally provided for恒温 control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are all treated with quenching and hard chrome, ensuring durability and easy disassembly at fixed points. The motor leads are protected by metal hoses, conforming to international standards.
Standard coil outlet air static pressure is 0~12Pa, while the residual pressure outlet air static pressure is 30Pa (or ≤50Pa), with code H.
The water pan and insulation are molded, with an overall adhesive bonding process, ensuring solid durability with no welding marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe sections are made from steel plates produced by Shanghai Baogang, with a spray-painted finish. The concealed pipe sections are made from galvanized steel or fingerprint-resistant steel plates.
The coil material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating material, featuring copper tubes arranged in an alternating pattern, offering excellent heat transfer performance and low air resistance.
The "Yingteng" explosion-proof fan coil series has been processed with special explosion-proof technology, making it suitable for 1 and 2 explosive and flammable areas. It is widely used in scientific research, oil, power plants, and other locations where IIA, IIB grade T1 to T4 combustible gas, steam, and air mixtures may form explosive hazards. Yingteng explosion-proof fan coils are suitable for environments with temperature requirements. They have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Product Quality and been issued with explosion-proof certification and explosion-proof CCC certificate. They feature a beautiful appearance, reasonable design, easy installation and maintenance. The full series of explosion-proof fan coils use branded compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).
