YingTeng Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP102(WM)
Brand: Yingten
Airflow (m³): 1020
Cooling Capacity (W): 5400
Heat Output (W): 8100
Noise dB(A): ≤45
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power Supply: 220V/50Hz
In-and-out pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1175 x 500 x 250
Explosion-Proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, the actual unit shall prevail.
1. Cold supply operating parameters: Inlet dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Inlet cold water temperature: 7°C, outlet water temperature: 12°C.
Heating operating parameters: Inlet air dry bulb temperature DB = 21°C, incoming water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
The Yinteng explosion-proof fan coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 "d""
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yinteng explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) Presence of explosive hazardous areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Inten Explosion-proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to diverse usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong corrosion resistance.
The drip pan is formed by a whole molding process, and the insulation is achieved through an integrated pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and drain functions to ensure thorough heat exchange and prevent pipe cracking due to freezing.
The cooler uses copper tubes and high-efficiency aluminum fins, mechanically expanded.
The Yingteng explosion-proof fan coil unit utilizes an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for either left or right-hand coils to be ordered at your convenience. If required, an automatic temperature control unit can be provided for maintaining constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that are self-lubricating. The motor shafts are heat-treated and hard chrome-plated for long-lasting durability and easy disassembly at the fixed points. The motor leads are protected with metal hoses, complying with international standards.
Standard coiled outlet air pressure is 0~12Pa, while the residual pressure outlet air pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability, and seamless finish. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed piping is made from sheets produced by Shanghai Baosteel, surface treated with electrostatic powder coating, while the concealed piping is made from galvanized steel or fingerprint-resistant steel.
The coiled tubing is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The interior of the coil box is lined with sound-absorbing and insulating material, featuring a copper tube arrangement with high thermal conductivity and low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been specially processed with explosion-proof technology, making it widely applicable in flammable and explosive areas classified as Zones 1 and 2. It is suitable for research institutions, oil refineries, chemical plants, power stations, and other locations where there may be or could be hazardous mixtures of IIa, Iib, T1 to T4 combustible gases, steam, and air, which could lead to explosion risks. Yingteng's explosion-proof ceiling fans are designed for environments with specific temperature requirements. They have been inspected and certified by the National Center for Quality Supervision and Inspection of Explosion-Proof Electrical Products, receiving both explosion-proof certification and explosion-proof CCC certificate. The series features an aesthetically pleasing design, reasonable engineering, and ease of installation and maintenance. The entire series utilizes branded compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and reliable safety, making it highly favored in the market. (Customizable options include: horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-type explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, flush-mounted explosion-proof ceiling fans, vertical exposed explosion-proof ceiling fans, etc.).
