YingTeng Horizontal Ceiling Type Explosion Proof Air Handling Unit Coil
Product Specifications
Model: BFP136(WM)
Brand: YingTeng
Airflow (m³): 1360
Cooling Capacity (W): 7200
Heat Output (W): 10800
Noise dB(A): ≤46
Cold water supply temperature: 7℃-12℃
Supplying hot water temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa / 50 Pa
Power Supply: 220V/50Hz
In and Out Water Pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1415 x 500 x 250
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only, and the actual product should be used as the standard.
1. Cold supply operating parameters: Inlet air dry bulb temperature DB=27℃, wet bulb temperature WB=19.5℃.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating工况parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter above and below the front of the unit in an anechoic chamber.
YingTeng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
The Yinteng Explosion-proof Ceiling Fan Coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres *Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yinteng Explosion-Proof Ceiling Fan Coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, T1 to T4 categories.
Inten Explosion-Proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in various series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable airflow, catering to various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The drip pan is fully molded, and the insulation is applied using a whole-pressure bonding technique, eliminating concerns about condensation.
Equipped with exhaust and draining functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The evaporator is made of copper tubes and high-efficiency aluminum fins, mechanically drawn for precision.
The Yingteng explosion-proof fan coil unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of either left or right coils for ordering. If required by the user, an automatic temperature control unit can be provided to maintain a constant temperature in the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all treated with quenching and hard chrome, ensuring durability and easy disassembly at fixed points. The motor lead wires are all protected by metal flexible hoses, meeting international standards.
The static pressure at the standard coiled outlet is 0~12Pa, while the static pressure at the residual pressure outlet is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive process, ensuring durability without weld marks, an attractive and lightweight appearance, no condensation, or dripping. The exposed piping is made from sheet metal produced by Baosteel Shanghai, with a spray-painted finish, while the concealed piping is made of galvanized steel or fingerprint-resistant steel.
The coiled tube material is made by rolling seamless copper tubes with corrugated aluminum fins, either hydraulically or mechanically expanded. The inside of the coil casing is lined with sound-absorbing insulation material, with copper tubes arranged in an interlaced pattern, boasting exceptional heat transfer properties and extremely low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series models have been specially processed with explosion-proof technology and are widely applicable in Class 1 and 2 flammable and explosive areas. They are suitable for scientific research, oil, power plants, and other locations where there may be or could be II A, II B, T1 to T4 groups of combustible gases, steam, and air mixtures that pose explosion hazards. Yingteng explosion-proof ceiling fans are suitable for environments with temperature requirements. Yingteng explosion-proof ceiling fans have been inspected and certified by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center, with explosion-proof certificates and CCC explosion-proof certificates. They feature an aesthetically pleasing design, reasonable construction, and ease of installation and maintenance. The entire series employs brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fans, horizontal exposed explosion-proof ceiling fans, cabinet-type explosion-proof ceiling fans, wall-mounted explosion-proof ceiling fans, embedded explosion-proof ceiling fans, and vertical exposed explosion-proof ceiling fans, etc.).
