YingTeng Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP51(WM)
Brand: YingTeng
Airflow (m³): 510
Cooling Capacity (W): 2700
Heat Output (W): 4050
Noise level dB(A): ≤39
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In-and-out piping: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 880 x 500 x 250
Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the actual product is the standard.
1. Cold supply operating parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Cold water inlet temperature: 7℃, outlet temperature: 12℃.
Heating工况parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter above and below the front of the equipment in an anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof marking of Ex db IIB T4 Gb.
The Yinteng explosion-proof ceiling fan coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by 'm' type encapsulation"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yinteng Explosion-Proof Ceiling Fan Coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free from corrosive gases.
c) There are hazardous explosive areas formed by mixtures of flammable gases, vapors from Groups II A, II B, and T1 to T4 with air.
Inten Explosion-Proof Ceiling Fan Coil Product Features
The Yingteng explosion-proof fan coil units include wall-mounted horizontal, concealed horizontal, vertical, ceiling-mounted, cabinet-style, and wall-hung series.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, meets various usage requirements.
The entire unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is formed by a whole molding process, and the insulation is achieved through a whole-pressure bonding technique, eliminating concerns of condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
The Yingteng explosion-proof fan coil unit employs an efficient aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of either left or right-hand coils for ordering. Upon customer request, an automatic temperature control unit can be provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are heat treated and chrome-plated for durability and easy disassembly at fixed points. The motor leads are protected with metal hoses, compliant with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability without weld marks, and an aesthetically pleasing, lightweight design; no condensation or dripping. The exposed pipe is made from steel sheets produced by Shanghai Baosteel, with a spray-painted surface treatment; the concealed pipe is made from galvanized steel or fingerprint-resistant steel plates.
The coiled tubing is made from seamless copper tubes with corrugated aluminum fins, formed through hydraulic or mechanical expansion. The interior of the coil casing is lined with sound-absorbing and insulating material, featuring copper tubes in an interlaced arrangement, which offers exceptional heat transfer properties and low air resistance.
The "YingTeng" explosion-proof fan coil series has been specially processed with explosion-proof technology and is widely applicable in Class 1 and 2 flammable and explosive environments. It is suitable for research, oil, power plants, and other locations where IIA, IIB, T1 to T4 groups of combustible gases, steam, and air mixtures pose explosion hazards. YingTeng explosion-proof fan coils are ideal for spaces with temperature requirements. They have passed inspections by the National Explosion-Proof Electrical Product Quality Supervision and Inspection Center and have been issued with explosion-proof certificates and CCC explosion-proof certificates. These fan coils feature an aesthetically pleasing design, reasonable structure, and ease of installation and maintenance. The full series utilizes brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and high safety reliability, making them highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).
