Inten Horizontal Concealed Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP204(WA)
Brand: YingTeng
Airflow (m³): 2040
Cooling Capacity (W): 10800
Heat (W): 16,200
Noise db(A): ≤50
Cool Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Water Pipes: ZG 3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 1740 x 475 x 246
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only, and the physical unit shall be the standard.
Supply Cooling Condition Parameters: Inlet Dry Bulb Temperature DB=27℃, Wet Bulb Temperature WB=19.5℃.
Inlet water temperature: 7℃, outlet water temperature: 12℃.
Heating operating parameters: Imported air dry bulb temperature DB=21℃, incoming water temperature 60℃.
2. Noise Measurement: Values measured at 1 meter in front of and above the equipment in an anechoic chamber.
YingTeng explosion-proof fan coil has the explosion-proof mark Ex db IIB T4 Gb.
Yinteng Explosion-proof Ceiling Fan Coil Series Products Conform to the Following Standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by encased "m" type"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yinteng Explosion-Proof Ceiling Fan Coil works normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Group II A, II B, T1 to T4 categories.
Inten Explosion Proof Ceiling Fan Coil Product Features
The Yingteng explosion-proof fan coil units include series such as horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-hung.
Low overall height, saving construction space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper pipes, and aluminum fins, offering strong rust resistance.
The drip pan is formed in one piece, and the insulation uses an overall pressure bonding technique, eliminating worries about condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipeline cracking from freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
Yiting Explosion-proof Ceiling Fan Coil Units utilize high-efficiency aluminum finned heat exchangers with low-noise fans, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precise design allows for either left or right-sided coils to be selected for ordering. Upon request, an automatic temperature control unit can be customized for consistent temperature control of the controlled space; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision ball bearings that can self-lubricate. The motor shafts are all heat treated and treated with hard chrome for durability, making the fixed points easy to disassemble. The motor leads are protected with metal hoses, in compliance with international standards.
Standard coiled outlet static pressure is 0~12Pa, pressure retaining outlet static pressure is 30Pa (or ≤50Pa), code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring strength, durability without weld marks, and an aesthetically pleasing and lightweight design; no condensation or dripping. The exposed piping is made from sheets produced by Shanghai Baosteel, with a powder coating finish, while the concealed piping uses galvanized steel or fingerprint-resistant steel sheets.
The coiled material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes in an interlaced arrangement, offering exceptional heat transfer performance and extremely low air resistance.
The "Yingteng" explosion-proof ceiling fan coil series has been processed with special explosion-proof technology and is widely applicable in flammable and explosive areas classified as zones 1 and 2. It is suitable for research institutions, oil refineries, power plants, and other locations where IIA, IIB class T1 to T4 combustible gas mixtures with air may form explosive hazards. Yingteng's explosion-proof ceiling fan coils are suitable for environments with temperature requirements. They have passed inspections by the National Supervision and Inspection Center for Quality of Explosion-Proof Electrical Products and been issued explosion-proof certification and explosion-proof CCC certificate. The coils feature an attractive appearance, reasonable design, and ease of installation and maintenance. The full range of explosion-proof ceiling fan coils use branded compressors, microcomputer intelligent control, digital display, and offer low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof ceiling fan coil, horizontal exposed explosion-proof ceiling fan coil, cabinet-type explosion-proof ceiling fan coil, wall-mounted explosion-proof ceiling fan coil, embedded explosion-proof ceiling fan coil, vertical exposed explosion-proof ceiling fan coil, etc.).
