Yiting Horizontal Surface-Mounted Explosion-Proof Ceiling Fan Coil
Product Specifications
Model: BFP68(WM)
Brand: YingTeng
Airflow (m³): 680
Cooling Capacity (W): 3600
Heat Output (W): 5400
Noise db(A): ≤41
Cold Water Supply Temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30Pa/50Pa
Power: 220V/50Hz
In and Out Pipe: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height, mm): 980 x 500 x 250
Explosion-proof marking: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; please refer to the physical unit for accuracy.
1. Cooling operation parameters: Inlet dry bulb temperature DB=27°C, wet bulb temperature WB=19.5°C.
Inlet cold water temperature: 7°C, outlet water temperature: 12°C.
Heating operating parameters: Inlet air dry bulb temperature DB=21℃, inlet water temperature 60°C.
2. Noise Measurement: Values measured at 1 meter above and below the front of the equipment in an anechoic chamber.
The YingTeng explosion-proof ceiling fan coil features the explosion-proof mark of Ex db IIB T4 Gb.
The Yingteng explosion-proof ceiling fan coil series products comply with the following standards:
GB/T 3836.1 - 2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2 - 2021 "Explosive Atmospheres Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres *Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type encapsulation"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yinteng explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Suitable for environments with temperatures ranging from -7℃ to 43℃, free of corrosive gases.
c) There are explosive hazard areas formed by mixtures of flammable gases, vapors, and air from Groups II A, II B, and T1 to T4.
Inten Explosion-Proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving building space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to diverse usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The overall mold-injected sink with integral pressure bonding for insulation, eliminating concerns of condensation.
Equipped with exhaust and drain functions, ensuring thorough heat exchange and preventing pipe cracking due to freezing.
The condenser is made by mechanical bending of copper tubes and high-efficiency aluminum fins.
YingTeng explosion-proof fan coil units are equipped with high-efficiency aluminum finned heat exchangers and low-noise fans, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
Precision design allows for the selection of either left or right-hand coils for ordering. An automatic temperature control unit can be optionally provided for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed-phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all treated with quenching and hard chrome for durability and are easy to disassemble at the fixed points. The motor leads are protected by metal hoses, in compliance with international standards.
The static pressure at the common coiled discharge outlet is 0~12Pa, while the static pressure at the residual pressure discharge outlet is 30Pa (or ≤50Pa), with the code H.
The water tray and thermal insulation are molded, with an overall adhesive bonding process, ensuring durability without weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from plates produced by Baosteel Shanghai, with a spray-painted surface, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel.
The coiled material is made of seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil box is lined with sound-absorbing and insulating materials, featuring copper tubes arranged in an interlaced pattern, offering exceptional heat transfer performance and low air resistance.
The "Yingteng" explosion-proof fan coil series has been specially processed with explosion-proof technology and is widely applicable in Class 1 and 2 flammable and explosive environments. It is suitable for research institutions, oil refineries, power plants, and other locations where IIA, IIB class T1-T4 combustible gases, steam, and air mixtures pose an explosion hazard. Yingteng explosion-proof fan coils are suitable for areas with temperature requirements. They have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and have received explosion-proof certification and CCC certification. These fan coils feature an aesthetically pleasing design, reasonable construction, and ease of installation and maintenance. The full series is equipped with brand-name compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored in the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, embedded explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).
