Product Specifications
Model: BFP34(WA)
Brand: YingTeng
Airflow (m³): 340
Cooling Capacity (W): 1800
Heat (W): 2700
Noise db(A): ≤37
Cold water supply temperature: 7℃-12℃
Hot Water Supply Temperature: 40℃-60℃
Working Pressure (KPa): 1.6
Static Pressure: 30 Pa/50 Pa
Power Supply: 220V/50Hz
Inlet and outlet pipes: ZG3/4
Condensate Drain Pipe: ZG3/4
Dimensions (Length x Width x Height mm): 740 x 475 x 246
Explosion-Proof Mark: Ex db IIB T4 Gb
Manufacturer: Henan Tongteng Explosion-Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; please refer to the actual product for accuracy.
1. Cooling supply conditions parameters: Inlet dry bulb temperature DB = 27°C, wet bulb temperature WB = 19.5°C.
Inlet water temperature: 7°C, outlet water temperature: 12°C.
Heating operating parameters: Inlet air dry bulb temperature DB=21℃, water inlet temperature 60°C.
2. Noise Measurement: Values measured at 1 meter in front of and above the equipment, within the anechoic chamber.
The Yingteng explosion-proof fan coil has the explosion-proof mark of Ex db IIB T4 Gb.
The Yinteng explosion-proof ceiling fan coil series products comply with the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *1 Part: Equipment General Requirements"
GB/T 3836.2 -2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4-2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9-2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres - Part 15: Design, Selection, and Installation of Electrical Equipment"
The Yingteng explosion-proof fan coil operates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m
b) Applicable environmental conditions: Temperature -7°C to 43°C, free of corrosive gases.
c) Presence of explosive hazardous areas formed by mixtures of flammable gases, vapors from Groups II A, II B, and T1 to T4 with air.
Inten Explosion-Proof Ceiling Fan Coil Product Features
The Yinteng explosion-proof fan coil units come in a variety of series, including horizontal surface-mounted, horizontal concealed, vertical surface-mounted, vertical concealed, ceiling-mounted, cabinet-style, and wall-mounted options.
Low overall height, saving architectural space.
High cooling (heating) capacity, low noise, three-speed motor for adjustable air volume, catering to various usage requirements.
The complete unit is made of hot-dipped galvanized steel, copper tubes, and aluminum fins, offering strong corrosion resistance.
The water pan is fully molded, and the insulation uses an integrated bonding process, eliminating concerns about condensation.
Equipped with exhaust and draining functions, ensuring full heat exchange and preventing pipe cracking due to freezing.
The condenser is made of copper tubes and high-efficiency aluminum fins, mechanically expanded.
The Yingteng explosion-proof fan coil unit utilizes a high-efficiency aluminum finned heat exchanger with a low-noise fan, enhancing heat exchange and maximizing the heat exchanger's thermal transfer efficiency.
精密 design allows for either left or right hand coil ordering. Optional automatic temperature control units can be custom configured for constant temperature control of the controlled area; (temperature control unit to be ordered separately)
The motor is an energy-saving fixed phase capacitor motor, equipped with imported high-precision steel ball bearings that are self-lubricating. The motor shafts are all heat treated and chrome-plated for durability, with easy disassembly at the fixed points. The motor leads are protected by metal hoses, compliant with international standards.
Standard coil outlet static pressure is 0~12Pa, while the residual pressure outlet static pressure is 30Pa (or ≤50Pa), with the code H.
The water tray and insulation are molded, with an overall adhesive bonding process, ensuring durability and absence of weld marks. The design is aesthetically pleasing and lightweight, with no condensation or dripping. The exposed pipe fittings are made from sheets produced by Shanghai Baosteel, which are surface-plastic coated, while the concealed pipe fittings are made from galvanized steel or fingerprint-resistant steel plates.
The coiled tubing is made from seamless copper tubes with corrugated aluminum fins, formed by hydraulic or mechanical expansion. The coil casing is lined with sound-absorbing and insulating materials, with copper tubes arranged in an alternating pattern, offering exceptional heat transfer properties and low air resistance.
The "YingTeng" explosion-proof air-cooled ceiling fan coil series has been specially processed with explosion-proof technology, making it suitable for Class 1 and 2 flammable and explosive environments. It is widely used in scientific research, oil, chemical, pharmaceutical, and power plant settings where IIA, IIB Group T1 to T4 combustible gases, steam, and air mixtures may form explosive hazards. YingTeng explosion-proof fan coils are suitable for areas with temperature requirements. They have passed inspections by the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products and been issued with explosion-proof certificates and CCC explosion-proof certificates. These coils feature an aesthetically pleasing design, reasonable structure, and are easy to install and maintain. The entire series utilizes compressors, microcomputer intelligent control, digital display, and boasts low noise, stable performance, simple operation, and safety. They are highly favored by the market. (Customizable options include horizontal concealed explosion-proof fan coils, horizontal exposed explosion-proof fan coils, cabinet-style explosion-proof fan coils, wall-mounted explosion-proof fan coils, flush-mounted explosion-proof fan coils, and vertical exposed explosion-proof fan coils, etc.).
