Product Description

The flow meter is composed of the following seven basic components:

Vortex generator

Aluminum alloy construction with helical blades at a certain angle, fixed at the front of the shell's contraction section, forcing the fluid to generate a strong Vortex flow.

2. Housing

Flanged and shaped fluid passage, with the shell material being cast aluminum alloy based on different working pressures. Gold or stainless steel.

3. Smart Flow Meter Integrator

Temperature, pressure detection simulation channels, flow detection digital channels, and microprocessing unit, liquid crystal drive circuit, and others Auxiliary circuit assembly, complete with external signal interface.

4. Temperature Sensor

The ptiooes resistor acts as a temperature-sensitive element, with its resistance value corresponding to the temperature within a certain temperature range.

Pressure Sensor

Using a resistive diffusion silicon bridge as the sensitive element, the resistance of its bridge arm undergoes the expected change under the action of external pressure, therefore, Under a fixed激励current, the potential difference between its two output terminals is directly proportional to the external pressure.

Piezoelectric Crystal Sensor

The throat, installed near the shell expansion section, can detect frequency signals of vortex rotation.

7. Crystallizer

Fixed at the shell outlet section, its function is to eliminate vortex flow to minimize the impact on the downstream instrument performance.