Process requirements for stainless steel soiled clothes well manufacturing

1. Stainless steel type stainless steel soiled clothes well vertical seams should be welded using straight seam welding machines and adopt the single-sided welding double-sided forming welding process. Stainless steel soiled clothes well manufacturers require ya gas double-sided protection for welding, aiming to minimize chromium loss and reduce the occurrence of intergranular corrosion in the welds. The welds must pass the welding process evaluation, and the products must undergo tensile testing and a 15% elongation rate test before welding.

2. The sprue is equipped with a 45° sloped channel, ensuring that dirty clothes and bedding slide into the main cylinder without wear during the casting process; the sprue is welded to the main cylinder and has been ground and polished, with the same material and thickness as the main cylinder.

3. Each support section of the main cylinder body must have a socket and plug expansion joint to prevent deformation of the cylinder body due to thermal expansion and contraction.

4. The main cylinder sections are connected using double flange socket connections, secured with Ω-shaped clamps. The interior connection should be ground smooth to ensure no clothing or bedding becomes an obstacle or causes damage when the cylinder is not in use.

5. To extend service life and ensure necessary strength, the flaps must be directly formed by extrusion molding from a solid tube, and spot welding is not allowed.

6. The stainless steel soiled-clothing well cast door partition features a fire sprinkler installation pipe. The fire sprinklers are installed by the fire department. Hulunbeier stainless steel soiled-clothing well, our company is solely responsible for coordinating with the fire department to reserve the DN50mm*H50mm sprinkler installation pipe.

How to control sanitation and fire safety issues in stainless steel soiled clothes wells

The fire linkage function allows for remote control of the fire control room within the restaurant when a fire is detected, triggering the fire equipment and systems. All doors within the system will also automatically lock to prevent the spread of the fire. The energy-saving function of the stainless steel soiled laundry well system is designed with fire safety in mind. The stainless steel soiled laundry well company selects normally closed electromagnetic locks, which are easy to install and, in their normal state, lock the towel track, providing energy-saving benefits.

Suzhou Elsroth Environmental Technology Co., Ltd.

Stainless Steel Grease Trap Main Tank Internal Diameter: 550 mm Material: 5mm thick 304-grade stainless steel plate Construction: The feed opening features a 45-degree inclined slide track to ensure that linens slide into the main tank without abrasion. The feed opening is welded to the main tank, with the same material and thickness. Structure: The soiled clothing well system is composed of channel pipes connected by insertion-type joints. On each level, the main tank is fixed to the platform or structure using zinc-iron brackets and bolts. The inner surface of the main channel pipe is polished smooth, ensuring no foreign objects inside to prevent unnecessary damage, obstruction, or adhesion when linens slide. Spray heads are installed at the top and bottom outlets of the passageway. The vertical pipe of the soiled clothing tank must have a service life of not less than 30 years.

Stainless Steel Laundry Chute Manufacturer - Hulunbeier Stainless Steel Laundry Chute - Elsner Environmental, provided by Suzhou Elsner Environmental Technology Co., Ltd. The Stainless Steel Laundry Chute Manufacturer - Hulunbeier Stainless Steel Laundry Chute - Elsner Environmental is a new upgrade released by Suzhou Elsner Environmental Technology Co., Ltd. this year. The above images are for reference only. Please call the contact number on this page or the image to request the contact person: Zhang Min.