Cleanliness Pressure Washing Equipment Features Introduction:

1. The cleaning equipment integrates cleaning, recovery, and filtration for sample preparation, revolutionizing the drawbacks of traditional manual cleaning and sample preparation, and enhancing work efficiency.

2. Equipment integrated with self-cleaning spray rinse, ensuring the cleanliness of the washing space.

3. The cleaning equipment operates with a 220V power source, ensuring a continuous and stable power supply, as well as clean and safe operation.

4. A relatively independent operation area for cleaning equipment, effectively isolating external environmental interference from the detection process.

5. The top of the cleaning equipment is equipped with an air filter, which has an effective filtration accuracy of 3um, to prevent factors in the air from affecting the test results.

6. The cleaning equipment features a built-in secondary precision filter with an effective filtration accuracy of 0.2um, reducing the impact of cleaning medium factors on test results.

7. Cleaning equipment can be pre-set with different standard requirements for cleaning pressure, cleaning time, and total cleaning volume, and can also perform attenuation tests on the inspected workpieces.

8. Our cleaning equipment offers a variety of cleaning methods (including pressure cleaning, ultrasonic cleaning,灌流清洗, recirculating ultra-fine filtration, and wall-spray cleaning, etc.), catering to different cleaning requirements for various workpieces.

9. Cleaning equipment displays the current working status in real-time. It alarms and prompts for troubleshooting when a fault occurs.

10. Cleaning equipment can be customized to meet different customer requirements.

Internal Images

Auxiliary Cleaning Turntable

Place the workpiece on the top of the turntable and rotate it to achieve a thorough cleaning without any blind spots.

Assisted Mechanical Arm (Manual Model)

Manual lift and 360° manual rotation of workpiece

Assisted Mechanical Arm (Electric Model)

Automatic elevation and manual 720° rotation of workpiece

Basic Parameters:

Overall Dimensions (W*D*H): 1100*780*2000mm; 1400*900*2000mm; 1600*900*2000mm

Main Frame Material: 304 Stainless Steel, Industrial Profiles

Pressure washing operation area size (W*D*H): 600*500*800mm

Additional cleaning space: 900*700*800mm and 1100*700*800mm (optional).

Pressure Wash Operation Room Material: 304 Mirror Polished Stainless Steel

Cleaning and Inspection Parts Auxiliary Accessories: One stainless steel grille (both coarse and fine) each.

Other parts and auxiliary tools are available for customization.

Cleaning room automatic up and down door stroke: 400mm; (electrical lock in case of power failure)

Cleaning Operation Gloves Length: 360mm (Standard Size L)

Master Control Display: HMI Human-Machine Interface

Cleaning Inspection Pressure: 0MPa - 0.6MPa

Flow Range: 1.0L/min - 5.0L/min, Accuracy: ±2%

Time Setting Range: 0-9999 S

Parts Cleaning Parameters Storage: 0-99 sets (default 12 sets, other storage quantities available for customization)

Functional Mode Selection: Pressure Wash Cycle, Self-Cleaning Single Cycle, Add Fluid, Drain Fluid

Stainless Steel Liquid Storage Capacity: 20L

Solvent Cleaner: AP760

Cleaning Fluid Recirculating Filter Precision: 0.2µm (Two-stage Filtration)

Applicable Detection Membranes: Ø47mm / Ø50mm

Air Purification Rate: 99.995% HEPA Filtration Precision: 0.3µm

Flow rate: 1200 m³/h; Exhaust flow: 400 m³/h

Air ventilation exhaust pipe interface: Ø100mm

Working Power Supply: AC220V, 50Hz; Power: 550W

Total weight approx.: 450 kg;