Function Introduction: Cleanliness Pressure Cleaning Equipment

1. The cleaning equipment integrates cleaning, recovery, and filtration into one, revolutionizing the drawbacks of traditional manual cleaning and sample preparation, and enhancing work efficiency.

2. Integrated equipment with spray rinsing and self-cleaning feature to ensure the cleanliness of the cleaning space.

3. The cleaning equipment operates using a 220V power source, ensuring a continuous and stable power supply for cleanliness and safety.

4. A relatively independent operation area for cleaning equipment, effectively isolating external environmental interference from the detection.

5. The top of the cleaning equipment is equipped with an air filter with an effective precision of 3um, to avoid the influence of airborne factors on the test results.

6. The cleaning equipment is equipped with a secondary precision filter element that effectively filters with a precision of 0.2um, reducing the impact of cleaning medium factors on test results.

7. Cleaning equipment can be pre-set with cleaning pressure, cleaning time, and total cleaning volume according to different standard requirements. Additionally, attenuation tests can also be conducted on the inspected workpieces.

8. Our cleaning equipment offers a variety of cleaning methods (pressure washing, ultrasonic cleaning, immersion cleaning, recirculating fine filtration, wall-spraying cleaning, etc.), catering to the diverse cleaning needs of different workpieces for our clients.

9. Cleaning equipment displays the current working status in real-time. It alarms and prompts for troubleshooting when a fault occurs.

10. Cleaning equipment can be customized to meet different customer requirements.

Internal Images

Assisted Cleaning Turntable

Place the workpiece on the top of the turntable, rotate the workpiece to achieve a thorough cleaning with no blind spots.

Assisted Mechanical Arm (Manual Type)

Manual lift and 360° manual rotation of workpiece

Assisted robotic arm (electric model)

Automatic elevation and manual 720° rotation of workpiece

Basic Parameters:

Overall Dimensions (W*D*H): 1100*780*2000mm; 1400*900*2000mm; 1600*900*2000mm

Frame material: 304 Stainless Steel, Industrial Profiles

Pressure Washing Operation Area Dimensions (W*D*H): 600*500*800mm

Additional cleaning spaces: 900*700*800mm and 1100*700*800mm (optional).

Pressure Wash Operation Room Material: 304 Mirror Polished Stainless Steel

Cleaning and Inspection Parts Auxiliary Accessories: One stainless steel grille (both coarse and fine).

Other parts auxiliary tooling available for customization

Cleaning room automatic up-and-down door stroke: 400mm; (electrical lock in case of power failure)

Cleaning Operation Gloves Length: 360mm (Standard Size L)

Master Control Display: HMI Human-Machine Interface

Cleaning Inspection Pressure: 0MPa - 0.6MPa

Flow Range: 1.0 L/min - 5.0 L/min, Accuracy: ±2%

Time Setting Range: 0-9999 S

Part Cleaning Parameters Storage: 0-99 sets (default 12 sets, other storage quantities available for customization)

Function Mode Selection: Pressure Wash Cycle, Self-Cleaning Cycle, Single Cycle, Add Fluid, Drain Fluid

Stainless Steel Liquid Storage Capacity: 20L

Solvent Cleaner: AP760

Cleaning fluid recirculation filter accuracy: 0.2µm (two-stage filtration)

Applicable Detection Membranes: Ø47mm / Ø50mm

Air Purification Rate: 99.995% HEPA Filtration Precision: 0.3µm

Flow rate: 1200 m³/h; Exhaust volume: 400 m³/h

Air Ventilation Duct Interface: Ø100mm

Working Voltage: AC 220V, 50Hz; Power: 550W

Total Weight: Approximately 450KG