Function Introduction: Cleanliness Pressure Washing Equipment

1. The cleaning equipment integrates cleaning, recovery, and filtration into one, revolutionizing the drawbacks of traditional manual cleaning and sample preparation, enhancing work efficiency.

2. Integrated equipment with self-cleaning spray, ensuring the cleanliness of the washing space.

3. The cleaning equipment operates with a 220V power source, ensuring a continuous and stable power supply for cleanliness and safety.

4. A relatively independent operation area for cleaning equipment, effectively isolating external environmental interference from the detection.

5. The top of the cleaning equipment is equipped with an air filter, with an effective filtering precision of 3um, to avoid the influence of airborne factors on the test results.

6. The cleaning equipment features a built-in secondary precision filter with an effective filtration accuracy of 0.2um, reducing the impact of cleaning medium factors on test results.

7. Cleaning equipment can be pre-set with cleaning pressure, cleaning time, and total cleaning volume according to different standard requirements. Additionally, attenuation tests can be conducted on the inspected workpieces.

8. Our cleaning equipment offers a variety of cleaning methods (including pressure washing, ultrasonic cleaning, flood cleaning, recirculating fine filtration, and wall jet cleaning), catering to different cleaning needs for various workpieces.

9. Cleaning equipment displays the current working status in real-time. It alarms and prompts for troubleshooting when a fault occurs.

10. Cleaning equipment can be customized to meet different customer requirements.

Internal Images

Assisted Cleaning Turntable

Place the workpiece on the top of the turntable and rotate it to achieve a thorough cleaning without any blind spots.

Assisted Mechanical Arm (Manual Type)

Manual lift and 360° manual rotation of workpiece

Assisted robotic arm (electric model)

Automatic lift and manual 720° rotation of workpiece

Basic Parameters:

Overall Dimensions (W*D*H): 1100*780*2000mm; 1400*900*2000mm; 1600*900*2000mm

Material of Main Frame: 304 Stainless Steel, Industrial Extrusion

Pressure washing operation area dimensions (W*D*H): 600*500*800mm

Additional cleaning space: 900*700*800mm and 1100*700*800mm (optional).

Pressure Wash Operation Room Material: 304 Mirror-polished Stainless Steel

Cleaning and Inspection Parts Auxiliary Accessories: One stainless steel grate (in various sizes).

Other parts and auxiliary tooling can be customized.

Cleaning room automatic up and down door stroke: 400mm; (electric lock on power failure)

Cleaning Operation Gloves Length: 360mm (Standard Size L)

Master Control Display: HMI Human-Machine Interface

Cleaning Inspection Pressure: 0MPa - 0.6MPa

Flow Range: 1.0L/min - 5.0L/min, Accuracy: ±2%

Time Setting Range: 0-9999 S

Part Cleaning Parameters Storage: 0-99 sets (default 12 sets, other storage quantities available for customization)

Function Mode Selection: Pressure Cleaning Cycle, Self-Cleaning Single Cycle, Add Fluid, Drain Fluid

Stainless Steel Tank Capacity: 20L

Solvent Cleaner: AP760

Cleaning Liquid Recirculating Filter Precision: 0.2µm (two-stage filtration)

Applicable test filter membranes: Ø47mm / Ø50mm

Air Purification Rate: 99.995% HEPA Filtration Precision: 0.3µm

Flow rate: 1200 m³/h; Exhaust flow: 400 m³/h

Air Ventilation Duct Interface: Ø100mm

Power Supply: AC 220V, 50Hz; Power: 550W

Total Weight: Approximately 450KG