Function Introduction: Cleanliness Pressure Washing Equipment

1. The cleaning equipment integrates cleaning, recycling, and filtration into one, revolutionizing the drawbacks of traditional manual cleaning and sample preparation, and enhancing work efficiency.

2. Equipment integrated with spray rinsing self-cleaning, ensuring the cleanliness of the washing space

3. The cleaning equipment is powered by a 220V power source, ensuring a continuous and stable power supply for cleanliness and safety.

4. A relatively independent operation area for cleaning equipment, effectively isolating external environmental interference with the detection process.

5. The top of the cleaning equipment is equipped with an air filter with an effective filtration accuracy of 3um, to avoid the influence of air factors on the test results.

6. The cleaning equipment is equipped with a secondary precision filter core with an effective filtration accuracy of 0.2um, reducing the impact of cleaning medium factors on the test results.

7. Cleaning equipment can be pre-set with different standard requirements for cleaning pressure, cleaning time, and total cleaning volume. Additionally, attenuation tests can be conducted on the inspected workpieces.

8. Our cleaning equipment offers a variety of cleaning methods (including pressure cleaning, ultrasonic cleaning,灌流清洗,recirculating fine filtration, wall-spray cleaning, etc.), catering to different cleaning needs for various workpieces.

9. Cleaning equipment displays the current working status in real-time, with an alarm prompt and troubleshooting guidance upon failure.

10. Cleaning equipment can be customized to meet various customer requirements.

Internal Images

Assisted Cleaning Turntable

Place the workpiece on the top of the turntable, rotate the workpiece to achieve a thorough cleaning without any blind spots.

Assisted Mechanical Arm (Manual Type)

Manual lift and 360° manual rotation of workpiece

Assistive robotic arm (electric model)

Automatic lifting and manual 720° rotation of workpiece

Basic Parameters:

Overall Dimensions (W*D*H): 1100*780*2000mm; 1400*900*2000mm; 1600*900*2000mm

Material of Main Frame: 304 Stainless Steel, Industrial Grade Profiles

Pressure washing operation area dimensions (W*D*H): 600*500*800mm

Additional cleaning space: 900*700*800mm and 1100*700*800mm (optional).

Pressure Wash Operation Room Material: 304 Mirror-polished Stainless Steel

Cleaning and Inspection Parts Auxiliary Accessories: One stainless steel grate (both fine and coarse) each.

Other parts auxiliary jigs are customizable.

Cleaning room automatic up and down door stroke: 400mm; (electrical lock in case of power failure)

Cleaning Operation Gloves Length: 360mm (Standard Size L)

Master Control Display: HMI Human-Machine Interface

Cleaning Inspection Pressure: 0MPa - 0.6MPa

Flow Range: 1.0 L/min - 5.0 L/min, Accuracy: ±2%

Time Setting Range: 0-9999 S

Part Cleaning Parameters Storage: 0-99 sets (default 12 sets, other storage quantities available for customization)

Function Mode Selection: Pressure Wash Cycle, Self-Cleaning Single Cycle, Add Fluid, Drain Fluid

Stainless Steel Liquid Storage Capacity: 20L

Solvent Cleaner: AP760

Cleaning fluid recirculation filter accuracy: 0.2µm (two-stage filtration)

Applicable detection membrane sizes: Ø47mm / Ø50mm

Air Purification Rate: 99.995% HEPA Filtration Precision: 0.3µm

Supply Flow Rate: 1200 m3/h; Exhaust Flow Rate: 400 m3/h

Air Ventilation Duct Connection: Ø100mm

Power Supply: AC220V, 50Hz; Power: 550W

Total weight approximately: 450 kg;