Cleanliness Pressure Washing Equipment Features Introduction:

1. The cleaning equipment integrates cleaning, recycling, and filtration into one, revolutionizing the drawbacks of traditional manual cleaning and sample preparation, thereby enhancing work efficiency.

2. Integrated spray and self-cleaning system for equipment, ensuring the cleanliness of the washing space.

3. The cleaning equipment is powered by a 220V power source, ensuring a continuous and stable power supply for clean and safe operation.

4. A relatively independent operation area for cleaning equipment, effectively isolating external environmental interference from the detection process.

5. The top of the cleaning equipment is equipped with an air filter with an effective precision of 3um, to avoid factors in the air affecting the test results.

6. The cleaning equipment features a built-in secondary precision filter core with an effective filtration accuracy of 0.2um, reducing the impact of cleaning medium factors on test results.

7. Cleaning equipment can be pre-set with cleaning pressure, cleaning time, and total cleaning volume according to different standard requirements. Additionally, attenuation tests can be performed on the inspected workpieces.

8. Our cleaning equipment offers a variety of cleaning methods (including pressure washing, ultrasonic cleaning, flush cleaning, recirculating fine filtration, and wall-spray cleaning), catering to diverse cleaning needs for different workpieces.

9. Cleaning equipment displays the current working status in real-time. It alarms and prompts for troubleshooting when a fault occurs.

10. Cleaning equipment can be customized to meet various customer requirements.

Internal Images

Assisted Cleaning Turntable

Place the workpiece on the top of the turntable and rotate it to achieve a thorough cleaning with no blind spots.

Assisted Mechanical Arm (Manual Model)

Manual lift and 360° manual rotation of workpiece

Assisted robotic arm (electric model)

Automatic lift and manual 720° rotation of workpiece

Basic Parameters:

Overall Dimensions (W*D*H): 1100*780*2000mm; 1400*900*2000mm; 1600*900*2000mm

Main Frame Material: 304 Stainless Steel, Industrial Grade Profiles

Pressure washing operation area size (W*D*H): 600*500*800mm

Additional cleaning space: 900*700*800mm and 1100*700*800mm (optional).

Pressure washing operation room material: 304 mirror finish stainless steel

Cleaning and Inspection Parts Auxiliary Accessories: One stainless steel grate (in different sizes).

Other parts auxiliary tools are customizable.

Cleaning room automatic up-and-down door stroke: 400mm; (electrical lock in case of power failure)

Cleaning Operation Gloves Length: 360mm (Standard Size L)

Master Control Display: HMI Human-Machine Interface

Cleaning and Inspection Pressure: 0MPa - 0.6MPa

Flow Range: 1.0L/min - 5.0L/min, Accuracy: 2%

Time Setting Range: 0-9999 S

Part Cleaning Parameters Storage: 0-99 sets (default 12 sets, other storage quantities available for customization)

Function Mode Selection: Pressure Wash Cycle, Self-Cleaning Single Cycle, Add Fluid, Drain Fluid

Stainless Steel Liquid Storage Capacity: 20L

Solvent Cleaner: AP760

Precision of Cleaning Fluid Recirculating Filter: 0.2 µm (Two-stage Filtration)

Applicable detection membrane: Ø47mm/ Ø50mm

Air Purification Rate: 99.995% HEPA Filtration Precision: 0.3µm

Flow rate: 1200 m³/h; Exhaust volume: 400 m³/h

Air Ventilation Duct Interface: Ø100mm

Operating Voltage: AC220V, 50Hz; Power: 550W

Total weight approx.: 450 kg;