Electro-fused fittings refer to plastic (polyethylene) pipe accessories that can be melted and fused together through the heat generated by an electric current.

Tools Required for Construction: pipe cutting machine; grinder (polishing disc), marker pen; electric melting welder (compliant with...)ISO 12176-2) Recommended: Jinan Badap 315A type (below 200mm bore) or Tianjin Zhengwei Welding Machines.

Installations of steel wire mesh plastic composite pipes and perforated steel strip plastic composite pipe materials require: pipe cutting machine; trimming knife, grinder (polishing disc), marking pen; electric melt welder (compliant with...)ISO 12176-2) Recommended: Jinan Badu 315A model (for diameters below 200) or Tianjin Zhengwei Welding Machines.

Installation and usage steps are as follows:
Vertically cut the pipe material, use a scraper to remove the surface oxide layer from the position where the pipe is to be inserted into the electric fusion fittings. Mark the depth of insertion on the pipe surface with a marker pen according to the depth of the electric fusion fittings. Insert the pipe into the electric fusion fitting until it reaches the marked depth. After installation, align the pipe's central axis with the electric fusion fitting. Secure the pipe and fitting with clamps to prevent misalignment and loosening during the welding process.

Installation and construction precautions:
No organic matter or other substances are allowed to contaminate the interior walls of the electric fusion fittings or the melting area of the pipe material during installation. Keep a safe distance from the welding fitting while welding, until the welding has cooled down.The 30S section can be approached from the rear, depending on the temperature and working voltage of the on-site environment. Insulation must be properly done for the welding electric fusion fittings, especially in environments with significant diurnal temperature variations. In such conditions, it is necessary to use straighteners and other tools to securely fasten the pipes on both sides of the electric fusion fittings to prevent thermal expansion and contraction from affecting the welding quality. During welding, the welding time can be appropriately adjusted. Input the matched power supply according to the requirements of the electric fusion welding machine. The farther the power source is from the welding machine, the larger the wire diameter of the power line is required to avoid under-voltage issues that could affect welding quality. During pipe installation, elbows and tees must be properly supported and reinforced, or securely mounted with brackets, and adequate pipe compensation should be made. Pipe materials must be buried below the frozen soil layer. During installation and welding, the pipeline should not be submerged in water. When temperatures are low, remember not to move the pipes or fittings during the cooling process.
Zibo Xinhong Pipeline Material Co., Ltd. is a professional manufacturer of composite pipes. We are a modern enterprise integrating the research and development, production, sales, technical support, and installation services of composite pipes.
Products are widely used in municipal tap water supply and chemical industries.、A variety of pipelines and equipment for power, heating, and mining industries, fully meeting the needs of the national water supply industry, industrial and mining enterprises, and factory construction.

Our entire staff will, as always, continue toHigh-qualityProducts & Services, collaborate with merchants at home and abroad, and create brilliance together!
For detailed inquiries, please call:13001502838