Overview:

SZGThe bi-conical vacuum dryer is a new generation of drying equipment developed by our factory, combining the technology of similar domestic products.SZGThe bi-conical vacuum features two-stage elastic connections with belts and chains, ensuring smooth operation. The specially designed casing fully demonstrates the excellent concentricity of the two shafts, and both the heat medium and vacuum system utilize reliable US technology rotary joints. On this basis, we have developedSZG-AIt offers variable speed control and constant temperature control. As a professional manufacturer of drying equipment, we supply over a hundred units annually to our customers. Our products range from high-temperature thermal oil as the heat medium to medium-temperature steam and low-temperature hot water. When drying sticky materials, our factory will specially design a "scraping blade" mechanism or install ball bearings inside the tank for you.

Principle:

Introduce thermal energy into the sealed sandwich layer(Hot water, low pressure, steam, or heat transfer oil)Heat is transferred to the drying material through the inner shell.

Under power drive, the drum rotates slowly, continuously mixing the material inside to achieve the purpose of enhanced drying.

The material is in a vacuum state, which causes the steam pressure to drop, reducing the moisture on the material's surface.(Solvent)Material moisture has reached saturation and evaporated, then promptly removed and recycled by a vacuum pump.(Solvent)Continuous penetration, evaporation, and discharge processes occur, with the material achieving drying in a very short time.

Features:

● During oil heating, automatic constant-temperature control is used to dry biochemical products and mineral raw materials. The temperature can be20～160Between ℃.

High thermal efficiency, higher than that of general ovens2Multiple times.

● Indirect heating, materials remain uncontaminated, in compliance with"GMP" Requirements: Equipment is easy to maintain and clean.

Application:

Suitable for concentration, mixing, drying, and low-temperature drying of powdered, granular, and fibrous materials in industries such as chemicals and food.(Biochemical products, etc.)More suitable for drying materials that are prone to oxidation, volatility, heat sensitivity, strong irritation, toxicity, and materials where crystal integrity must be preserved.