1、The spray flow rate can be manually adjusted and displayed.
2. Multi-directional and multi-angle spray (manual) of the test piece
3. Nozzle Inner Diameter: Φ6.3mm, Water Flow Rate: 12.5L/min
4. 1 dial pressure gauge, made of rust-proof material, comes with a 5-meter flexible hose, capable of...Withstands high water pressure tests.
5. Spray Head Splash Test
Testing Equipment: Portable Splash Test Apparatus
Sample Placement: Remove the baffle installed with a balancing weight on the equipment, ensuring the parallel distance from the top of the test to the water outlet of the handheld nozzle is between 300mm and 500mm.
Test Conditions: The baffle with balancing weights should be installed during the test, with a water flow rate of 10 L/min.
Test Duration: At least 5 minutes per square meter of the surface area of the inspected sample's shell (excluding the installation area), with each square meter taking 1 minute.
Water Spraying (hose) System Test Device, Waterproof Protection Grade 3, 4
1. Portable Mounting; 2. Spray Bar; 3. Flexible Hoses; 4. Flow Meters and Pressure Gauges; 5. Gate Valves; 6. Test Sample; 7. Balanced Weight; 8. Aperture of the Device;
Note: The spray pipe has 121 holes with a diameter of 0.5mm.
-- 1 center hole
-- Core area 2nd floor (12 holes per floor, 30-degree distribution)
-- Outer ring with 4 circles (each with 24 holes, 15-degree spacing)
-- Portable cover.
Sprinkler pipes are made of stainless steel.
Illustration -- Portable Sprinkler (Sprinkler Pipe) Test Device, Waterproof Protection Class 3 and 4
Section 3: Equipment Usage Conditions:
1. Flat ground, excellent ventilation;
2. No strong vibration around the equipment.
3. No strong electromagnetic fields around the equipment.
4. No flammable, explosive, corrosive materials, or powdery substances are present around the equipment.
5. Drainage facilities are available near the equipment.
6. Ground bearing capacity; not less than 400 kg/㎡
7. Environmental Conditions:
Temperature: 5°C to 35°C
Pressure: 86kPa to 106kPa.
