The Hot Cleaning Furnace is a new specialized equipment designed for cleaning paint return workpieces and fixtures on coating lines, widely used in industries such as air conditioners, refrigerators, microwave ovens, electric fans, computers, and home appliances, as well as in motorcycle, bicycle, automotive, steel furniture, communication, and transmission and transformation industries, with comprehensive performance meeting standard levels. The equipment not only boasts excellent environmental protection capabilities but also offers significant economic benefits. After inspection by the environmental protection department, the emissions of pollutants like SO2 and NO are only 1/10 of the national standard, and its operating cost is merely 1/8 of paint stripping agents.
I. Product Application
Remove the continuously thickening coating from the spraying fixtures and clamps without altering the mechanical properties of the fixtures.
2. Complete and thorough stripping of non-conforming paint or powder coatings from the surface of metal components, with no damage to the workpiece.
3. Clean the paint layer adhered to the filter mesh and fan impeller of the water curtain cabinet.
4. Clean and remove winding and adhered organic matter from wires, cables, transformers, motors, and printing rollers.
5. Clean and remove grease, oil stains, and other organic substances from parts such as the engine, crankshaft, housing, piston rings, etc.
II. Specifications and Data
Cabin: Heavy-duty steel plate structural steel, square and channel steel supports. Full-welded construction with sealed contacts to prevent fuel loss due to leakage.
Floor: Rigid refractory castable, thickness of 4"-5" (10-13cm), reinforced with steel channel beams. Easy to remove ash.
Door: Equipped with a snap-locking component and high-strength sealing strip. The door can open over 180 degrees, ensuring safety and reliability with ease of use and durability.
Explosion-proof: The unique gravity-sealed top automatically vents excess pressure, then closes, preventing air from contacting combustible materials.
Next to Insulation: The furnace wall, roof, and door are covered with 2-3 layers of lightweight ceramic fiber blanket (10-15cm) for insulation, secured with stainless steel pins, stainless steel mesh plates, and locking washers, free of asbestos. Metal sleeves prevent mechanical injury to operators from the insulation panels. Clean furnace insulation rating up to 2300F (1275°C).
Exhaust:natural gas(Gas pressure requirement: 5-8 KPa), or light diesel.
Power Supply: 220-250V, 50Hz, Single Phase, 5-10A
Water Supply: Minimum pressure 40 psi, maximum pressure 100 psi. Minimum flow rate 5 gpm (15 liters/minute).
Normal Cycle: 3-5 hours (including cooling time) with automatic control.
Normal operating temperature: 750-800°F (400-430°C)
Pollution Standards: Compliant with new environmental protection standards.
Safety and Health Standards: Compliant with new OSHA standards. Meets NFPA 86 requirements.
Insurance Standards: Compliant with most national and local regulations.
Corrosion-Resistant Steam Barrier: Prevents corrosive steam from condensing in the furnace. Significantly extends the lifespan of the blast furnace.
Combustion chamber protection: Heavy-duty steel guardrails are installed around the upper and lower combustion chambers to prevent accidental or careless collisions.
Multiple models of trolleys: Various models are available to meet your diverse load requirements (standard containers).
Gas Burner: Designed specifically for furnace use. Features include an excellent clog-free nozzle design, easy maintenance, and heavy-duty construction. The burner's automatic cooling system prevents nozzle damage.
